Be more specific. What happens (or doesn't happen) when you try to bleed the clutch? i.e. How are you attempting to bleed it?
Hi to cut a long story short clutch actuator was leaking fluid.
So got actuator upgrade kit and installed could not bleed clutch pulled apart and checked reinstalled still cannot bleed clutch for pressure.
Installed new Master cylinder still cannot bleed clutch any ideas guys it doing my head in : )
Be more specific. What happens (or doesn't happen) when you try to bleed the clutch? i.e. How are you attempting to bleed it?
Use a pressurized bleeder kit / vacuum unit.. I use it on Harleys all the time...
You can also reverse bleed using a turkey baster or 30cc syringe and some hydraulic tubing. If you do it this way be sure to have the reservoir covered with a towel or other absorbent material as to keep the brake fluid from spraying onto the plastics or instrument cluster. For some reason I could never get the vacuum bleeder to work for me despite having used it before on other vehicles.
It took a long time for me. Just keep pumping. It will go through eventually
Sucks dick bleeding our clutch. keep at it though itll work.
Found the problem guys it bleed easy as when the piston spring is put where its supposed to be duh