Welcome to our Buell forum and performance parts shop!

Posted:  26 Jul 2007 16:15	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  14 Reputation: Unranked [?] User Rank: Second Lieutenant
alright guys, today, drove to work like normal, stopped at a convenience store 2 blocks from work (normal) went inside, had breakfast...upon leaving it happened. i started the bike, before ignition caught and started it backfired thru the carb.  after that there was no fire.  the starter would just crank and crank...did i foul the plug?  or what happened? someone, anyone.  even then, i was talking with ezblast thru email about a loud chattering noise, i believe it's the primary chain but i haven't had time to look at it.  what does anyone else think, it's almost louder than the exhaust. thanks

Posted:  26 Jul 2007 21:31	[?]
Moderator Currently Offline Join Date: Jun 2007	Posts:  2627 Reputation:  49 [?] User Rank: Five-Star General
got some more detais on the bike? type, milage, etc...

Posted:  27 Jul 2007 01:50	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  581 Reputation:  6 [?] User Rank: Brigadier General
My first guess will be the boot between the carb and intake, especially if it is more than a couple of years old. My wifes blast would backfire occasionally and then one time bigger backfire than normal and it died then would not start. Fortunately this happened at the buell factory and the mechanic there checked the boot and sure enough it was cracked. I'll bet the backfire on yours was strong enough to crack a weak spot. It will be sucking too much air to start. Let's hope it is the boot because if not it may be more serious.

Posted:  27 Jul 2007 06:30	[?]
Registered User Currently Offline Join Date: Jan 2007	Posts:  149 Reputation:  8 [?] User Rank: Captain
Das Boot!

Posted:  27 Jul 2007 08:01	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  581 Reputation:  6 [?] User Rank: Brigadier General
Quote: Das Boot! LOL

Posted:  03 Aug 2007 20:01	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  14 Reputation: Unranked [?] User Rank: Second Lieutenant
it's an 03 buell blast, no engine mods other than vance and hines pipe.  I'll take a look at the boot...if it happens to be the boot then how can i find another one? thanks

Posted:  04 Aug 2007 00:19	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  581 Reputation:  6 [?] User Rank: Brigadier General
any Buell dealer can get it

Posted:  06 Aug 2007 17:34	[?]
Registered User Currently Offline Join Date: Jun 2007	Posts:  14 Reputation: Unranked [?] User Rank: Second Lieutenant
so yesterday i tore into the buell...i took off the gastank and the breather box only to find the carb and the boot TOTALLY OFF OF THE INTAKE!!!  It just was hanging there.  so i fixxed that.  Now im going to do the sock filter over the carb, i was going to build my own down tube for a cone filter but i dont know how long im going to spend on it.  Also, after taking off the box if you get into the throttle it leans out, like it loses it's pep.  Is this due to the stop jets?  or what is it?

Posted:  07 Aug 2007 06:24	[?]
Registered User Currently Offline Join Date: Jan 2007	Posts:  149 Reputation:  8 [?] User Rank: Captain
Replace boot - its torn - lol

Professional Web Design and eCommerce Optimization by Slingshot SEO 1.04, RSS 2.0 Atom 1.0

Buell Forum Home           Buell Specs           Buell Links           Firebolt Buell Parts           Lightning Buell Parts           1125R Buell Parts          
Blast Buell Parts           Buell Parts Shop           Contact Us