Actually I got the back good now.. but the front doesnt seem right..
Do you need extra spacers on the d and d exhaust... the backs straps feel tight and they are still loose.. And do you re use the front strap? Im in the middle of it right now.
Actually I got the back good now.. but the front doesnt seem right..
The front just bolts on. It shouldn't need a strap if i remember correctly.
Hard to see without pics but that spacer that goes in the bottom of the engine case didn't fall out did it? But should go on using all "but only" stock parts. Nothing extra should be needed, I have this exhaust and take it off and on all the time! Try loosening everything from the header back and then re-tighten.
Yea I got it on. The rear strap had a "tough" spot thats why I thought I bottomed the strap out, but once I pushed through it, it snugged up nice.. I think Im missing a bolt up front that goes through the frame and hanger on the muffler... Only thing holdin it on is the header strap and two rears.
Yes you are missing a bolt then, and a bottle cap size spacer!
Might have to grab a bolt for it then.