Buell Forum           Buell Service Manuals           Buell Parts           Contact Us           Buell.com           Member's Buell Pics

Buell Parts

  
»User: »Password:   Remember Me? 
Buell Forum / Buell XB Forum / Do-It-Yourself Buell Mods / How To: Build your own Wireless ECMSpy cable!

Posted:  16 Apr 2010 18:11 [?]  
Urban
Posted:  18 Apr 2010 06:53 [?]  
dont forget you can  use the phone network wireless air card to link to the net while riding. then a person can from the remote location adjust while you ride.
just make sure you are in a area that has good signal always.

note on the fuel maps in ecmspy you dont have to toggle the switch between burns.  all other data you do. so you never loose connection.

tim and I did that once if I remember correctly.
I have sent my bike out that way and at the track. full wireless back to the pit. the power of the air card. wired or wireless.

mike
Posted:  30 Apr 2010 01:02 [?]  
any update?
Posted:  07 May 2010 07:03 [?]  
you can  use Rf chips also. the low cost 5.99 transceiver chips will do the trick. no firmware needed on the bike side.

Tim:
A good remote server is www.teamviewer.com. just get the noncommercial version. it's free...

from there use the new 4 g network. poof your in.

plus the fuel maps can be changed without the toggle on the run switch. this works with ecmspy only. ecmread you need to toggle. you can even use this to teach others the basics on pretty much anything. even share files directly.


Mike
Posted:  29 Aug 2010 13:16 [?]  
Does the initial post only work if your computer is blue tooth capable? Or does the  transmitter work as a wireless network basically?

Professional Web Design and eCommerce Optimization by Slingshot SEO, XML RSS 2.0 XML Atom 1.0

Welcome to our Buell forum! Shop performance motorcycle parts.

Buell Forum Home           Buell Specs           Buell Links           Contact Us