EBR contact

[mrlogix]

Does anyone here know anyone at EBR that could answer some tech questions for me on the 1190 big bore kit sold for 1125's.
Thanks

[d_adams]

1st point of contact will probably be Adam Wells in for customer service. Best way to reach him is via email.

tech2@ebr.com

[mrlogix]

thanks Dean

[Cherry_Bomb]

I contacted them via THIS address regarding a series of race ecm questions and got a rather quick response.

[mrlogix]

sent message to the email Dean gave me, if I don't get a response I'll try the second one. Thanks

[mrlogix]

just got a reply to my questions. The parts such as cams, and heads are different designs from the 1125, 1190RS and the 1190RX.

Hi John,
While the 1125, 1190RS, and 1190RX may have the same base part numbers (starting with V0001 or V0002) they are quite a bit different in their design, as indicated by the second portion of the part number (.1AMA, .1B6, .1B7).
These differences include chamber volume and design, intake and exhaust port design, machining, valve seat material, valve guide material, etc.
The castings for the RX are different as well, specifically in comparison to the 1125 and RS. The RX uses a new design casting. They are all, indeed, different parts. Bottom line = all three engines show different part numbers because they all use different parts. The RS and RX use different cam profile designs.

So I asked about availability of RX engine parts and can I order direct or do I have to go through one of their dealers.

Stay tuned.

[mrlogix]

well they said that to order 1190RX parts I have to go through one of their dealers, no direct sell of RX/SX parts. They also said that none of the dealers are stocking yet, but the parts are available. :D

[mrlogix]

Has anyone that has bought a new RX/SX received a service manual or parts manual yet? I know that a USB drive came with the bike that had the owners manual on it, but they were supposed to contact you when the service/parts manual became available. Anyone? I have a copy of the partial release part manual that AF1 has on their website, but it only covers the bodywork/frame stuff like for an accident repair.

[UMDterp13]

What parts are you trying to get?

[mrlogix]

trying to get part numbers and prices for head assemblies and camshafts