-
I have acquired a studder from idle to 4500 rpm.. a few days ago my lights would flicker when I hit a bump and that's when the studdering started.. I found that the positive battery connection was loose.. I tightened it and at the same time I also reinstalled the inner airbox.. would the inner air ox cause this or does the tps need reset.. k and n is on order..
-
I'd reset TPS, and check plugs. I had an issue with a loose cable that caused some stumbling and backfiring then no starting. I changed plugs and it was fixed.
-
ill see what that does.. thanks
-
i had the same exact problems i changed my plugs and cleaned off the battery terminals that seemed to do the trick
-
is it a pain in the a++ to change them like on xb....
-
It's not too bad. Need a wobble joint, search for the DIY on changing plugs.
-
The weather is nice here today so I'm just gonna pull the inner air box off and see what it does.. then I see about the plugs. What plugs does the 1125 platform like
-
**** man I'm sorry....didn't realize you had an 1125. I'd bet almost all of here that responded are thinking you have an XB...
-
Ha. That's why I posted under 1125cr forum....
-
yeah I have a problem with reading thread sections....I don't