I had to file a little off the aftermarket lever to get that clearance but it still worked fine. A couple pistons in the caliper seemed very hard to press in (compared to the others) and take a very...
Type: Posts; User: hoops2005
I had to file a little off the aftermarket lever to get that clearance but it still worked fine. A couple pistons in the caliper seemed very hard to press in (compared to the others) and take a very...
Thank you for the info. I switched out the master cylinder for the buell one and the stock buell line. The brake level was much firmer, however, the brakes still do not release. I checked the weep...
Hey, I swapped a buell xb rim , rotor, and caliper on to my cruiser. Everything worked great until I bleed the brake, when I tried to rotate the wheel the pads just rub consistently and if the wheel...
Thanks guys. I have a plan for wha I'm doing now. Only question is I want to have a large outlet tip, like in the picture below but am having a hard time finding one. Looks like ss, but chrome is...
Thanks for the info guys. I'm trying to get a game plan down and do it this weekend. I just don't want to lose power doing this or anything.
Thanks. I've seen your exhaust on here and they are badass.
Now will addig two baffles welded, flat piece of steel, to the top and bottom of the chamber (pointing towards the front of the bike) help...
Hey,
I have a xb9 and want to modify the exhaust so it is a lot louder. I have done research on here but still would like some input (i do have all the tools and stuff to do it). I would like to...