Mine for some reason looks like the 2010 kinda and I have an 07 Firebolt. But just compared the original pic to mine and I found what wire to yank... WORKS GREAT!!!!!! Thank you!!!!!!!!
Another bolt now blinking LEDs after this mod! :)
I desoldered (is that even a word?) and then used a spade bit by hand. Pushing and twisting from under and the connection came free. I removed it completely.
Cyclic legend!
Great photos snrusnak!
Thanks for sharing all.
Mine for some reason looks like the 2010 kinda and I have an 07 Firebolt. But just compared the original pic to mine and I found what wire to yank... WORKS GREAT!!!!!! Thank you!!!!!!!!
Definitely works well. Great mod, simple and money saving. The blinkers still blink a bit faster than before. However its not as fast as bulb blown speed... if that makes sense.
Excellent tip friend. I will definitely try this, Led flashers are so much better. I was just looking at the flasher unit today, it's in the nose cone behind the lights on XB9Rs.
It's easier just to do this mod, and it's free.... why fight what's natural???
It works, I have it done on my bike.
Ep36 it must say 3-6 led lamps on it.
^That info has been posted hundreds of times.
IMG_0557.jpg I can't believe how easy that was! IMG_0556.jpg And it works! Thanks Cyclic
Last edited by JeremyConnors; 09-09-2016 at 06:57 AM. Reason: space
Did this on an 09 CityX today. Works great. Thanks for the info on the mod.