I emailed to americansporbike. But anyway I've already installed the new gasket so I hope it will work. In addition I applied black RTV silicone on the stator grommet.
Here is the process:
Remove the stator grommet using flat screwdriver covered by a few layers of tape. Use the screwdriver like lever resting it on the primary wall. The grommet comes out very easy this way.
Clean the grommet and all holes and the starter place using brake cleaner. Cover the stator before cleaning because the brake cleaner can dilute the stator coils wires clear coat.
Apply black RTV silicone on the grommet and reinstall it.
The starter gasket from americansportbike has bigger hole so it is not going to stay on the starter while installation, so use some tape to temporary fix the gasket while starter installation.
Last edited by TPEHAK; 11-22-2015 at 05:50 AM.