Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: studdering after loose possitive cablei

  1. #1
    Senior Member
    Join Date
    Jun 2011
    Posts
    1,297


    Members don't see the above ad. Register now - it's free!
    I have acquired a studder from idle to 4500 rpm.. a few days ago my lights would flicker when I hit a bump and that's when the studdering started.. I found that the positive battery connection was loose.. I tightened it and at the same time I also reinstalled the inner airbox.. would the inner air ox cause this or does the tps need reset.. k and n is on order..

  2. #2
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,226
    I'd reset TPS, and check plugs. I had an issue with a loose cable that caused some stumbling and backfiring then no starting. I changed plugs and it was fixed.

  3. #3
    Senior Member
    Join Date
    Jun 2011
    Posts
    1,297
    ill see what that does.. thanks

  4. #4
    i had the same exact problems i changed my plugs and cleaned off the battery terminals that seemed to do the trick

  5. #5
    Senior Member
    Join Date
    Jun 2011
    Posts
    1,297
    is it a pain in the a++ to change them like on xb....

  6. #6
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,226
    It's not too bad. Need a wobble joint, search for the DIY on changing plugs.

  7. #7
    Senior Member
    Join Date
    Jun 2011
    Posts
    1,297
    The weather is nice here today so I'm just gonna pull the inner air box off and see what it does.. then I see about the plugs. What plugs does the 1125 platform like

  8. #8
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,226
    **** man I'm sorry....didn't realize you had an 1125. I'd bet almost all of here that responded are thinking you have an XB...

  9. #9
    Senior Member
    Join Date
    Jun 2011
    Posts
    1,297
    Ha. That's why I posted under 1125cr forum....

  10. #10
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,226
    yeah I have a problem with reading thread sections....I don't

Page 1 of 2 12 LastLast

Similar Threads

  1. studdering/knocking/backfiring????
    By krause95 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 9
    Last Post: 06-11-2013, 08:47 PM
  2. studdering when outside temp is hot??
    By xb1339s in forum Troubleshooting
    Replies: 4
    Last Post: 08-06-2012, 08:31 AM
  3. 03 xb9 studdering problem
    By jeremysxb9 in forum Troubleshooting
    Replies: 1
    Last Post: 07-25-2012, 02:09 PM
  4. Back end loose...
    By strider5656 in forum Troubleshooting
    Replies: 6
    Last Post: 07-05-2011, 01:22 PM
  5. Bike stuttering, or is it studdering?
    By fenster in forum Buell Firebolt XB12, XB9
    Replies: 9
    Last Post: 07-18-2009, 01:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •