I'd reset TPS, and check plugs. I had an issue with a loose cable that caused some stumbling and backfiring then no starting. I changed plugs and it was fixed.
I have acquired a studder from idle to 4500 rpm.. a few days ago my lights would flicker when I hit a bump and that's when the studdering started.. I found that the positive battery connection was loose.. I tightened it and at the same time I also reinstalled the inner airbox.. would the inner air ox cause this or does the tps need reset.. k and n is on order..
I'd reset TPS, and check plugs. I had an issue with a loose cable that caused some stumbling and backfiring then no starting. I changed plugs and it was fixed.
ill see what that does.. thanks
i had the same exact problems i changed my plugs and cleaned off the battery terminals that seemed to do the trick
is it a pain in the a++ to change them like on xb....
It's not too bad. Need a wobble joint, search for the DIY on changing plugs.
The weather is nice here today so I'm just gonna pull the inner air box off and see what it does.. then I see about the plugs. What plugs does the 1125 platform like
**** man I'm sorry....didn't realize you had an 1125. I'd bet almost all of here that responded are thinking you have an XB...
Ha. That's why I posted under 1125cr forum....
yeah I have a problem with reading thread sections....I don't