They do not do those catch cans anymore because of it is too expensive now for some reason.
Emailed him. I like this setup, looks very clean
http://www.kdfab.com/catchcaninstructions.htm
The reason I want to install breather reroute is because of removing the PVC valves hoses from the airbox baseplate is PITA, I need to cut those hoses and install new each time I need to dive under the baseplate, I hate it.
Last edited by TPEHAK; 08-13-2017 at 01:53 AM.
They do not do those catch cans anymore because of it is too expensive now for some reason.
If you really need a catch can, just paint a 5hr energy bottle black and put a hole just large enough for your tubing to fit REALLY snug through the top.
Put a couple holes in the can, to allow it to breath and to drain it, and call it a day.
That's my set up.
But I understand it might not be expensive enough or complicated enough for some of you guys.
In that case get with a machine shop and see what they can CNC for ya out of a solid piece of titanium
Another great 'how to' I was able to sort this out quickly and move on THANKS!
can anyone please share the step by step pictures? they are not showing anymore. thanks in advance!
This should help:
https://youtu.be/KpOH2Uf8u9c
Also, to help you with any additional questions go to www.buellmods.com and download a service manual.
Last edited by Chicknstripn; 10-31-2017 at 08:41 PM.
Last edited by TPEHAK; 10-31-2017 at 09:51 PM.
I don't have pics but I can tell you with absolute certainty that adding a catch can and breather filter is unnecessary and counterproductive.
Remove the air box base plate connect the hoses from the breather valves to a T or Y fitting, attach some ⅜ fuel line to that same fitting, and then run the hose down behind the left rider footpeg and leave it open to freely vent to the ground.