No guarantees, but I will help if I can! In addition to the current Bin in your ECM, I also need a data log recording of the issue.
If you have the correct XDF (ex: BUEGB_V5.xdf) .ADX loaded (ex: DDFI_2_2003-2007_Codes_Test__TPS.16245915.adx), recording is simply a matter of doing the following:
1. Tools -> Release Emulation Hardware
2. Then Acquisition -> Start/Stop Data Scan (or click on double arrows icon)
You should see DA:Connected" in blue at the bottom
3. Then click on the red Recording button on the Log toolbar to start recording.
The recording needs to start *before* you crank the bike, then start the bike, and then do what is needed to duplicate the issue, then let it idle again, then stop the recording (just click the stop button). Tunerpro will save the recording as a .XDL file, which is what I need in addition to the .Bin. The more recordings (and the longer), the better.
It would also be helpful to have another recording where you let it idle for at least 120 seconds before attempting to give it throttle.