Results 1 to 4 of 4

Thread: High Beam light in Dash

  1. #1
    Senior Member
    Join Date
    Jun 2013
    Posts
    250

    High Beam light in Dash

    The light on my cluster for the high beam does not come on. I haven't messed with it yet but this is a fairly easy fix correct?! Just being sure before I crack it open

  2. #2
    Senior Member neilrl79's Avatar
    Join Date
    Feb 2012
    Location
    Cecil County, Maryland
    Posts
    1,239
    If it is just a burnt bulb then yes, it's an easy fix.

    Pull the flysceen
    Pull the gauge cluster
    Open cluster
    Replace bulb
    Put it back together.

  3. #3
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    ^^^^^what neil said. it is a tiny LED bulb and can be a tad challenging to source. let me know if you need a few and will send you the link.

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,866
    These guys are both on it. I'd suggest checking the input wire at the dash plug for the indicator bulb first. Quick test light poke will save you a little time.

    Wiring diagram at Buellmods.com



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •