Results 1 to 4 of 4

Thread: 2009 Buell Firebolt xb12r Throttle tubes

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    6

    2009 Buell Firebolt xb12r Throttle tubes

    Does anyone have any idea of other bikes that use similiar throttle tubes?

    Thanks

  2. #2
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    the following tubes fit with zero to very minimal mods:
    1-----https://www.amazon.com/dp/B000WJ7OIA?tag=viglink27866-20
    2---motion pro part # 01-0094
    3----2003-late 2008 yamaha R6
    around $10 or so retail.
    that's all i can think of at the moment

  3. #3
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Is there a reason any made for 7/8" bars wouldn't work? The cruiser type bikes are usually 1" so no to using those.

  4. #4
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    Quote Originally Posted by lunaticfringe View Post
    the following tubes fit with zero to very minimal mods:
    1-----https://www.amazon.com/dp/B000WJ7OIA?tag=viglink27866-20
    2---motion pro part # 01-0094
    3----2003-late 2008 yamaha R6
    around $10 or so retail.
    that's all i can think of at the moment
    That R6 throttle is a quick throttle upgrade from stock and requires some trimming of the housing to get it to fit. I have one on my bike, definitely worth it.

    Cooter, this also answers your question. I would assume any push/pull 7/8" handle bar throttle tube could be made to work, but might be some differences that need to be trimmed to work.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •