Results 1 to 9 of 9

Thread: LSL Superbike Low bars

  1. #1
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25

    LSL Superbike Low bars



    Members don't see the above ad. Register now - it's free!
    Can anyone comment on whether LSL Superbike Low handlebars (steel, black, 7/8") are a direct bolt-on for our motorcycles? I have an '08 XB12Ss. My stock bar is bent and I was wondering if I could replace it with this one without having to get risers and/or extend cables, etc.

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    4,359
    They look close enough, you should be ok. I know the RC (Ricky Carmichael) ultra lows work really well without mod.

  3. #3
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25
    Thanks. I ordered one... we'll see how it turns out. I'll post some pics when it's done.

  4. #4
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25
    Well, unfortunately, it doesn't look like the bar fits without contacting the top of the forks. I believe the forks are adjustable in their position in the upper clamps and I might be able to get some more clearance by sliding them down a bit, but I'll have to research that a bit more. Otherwise, risers of some kind might be needed?

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    4,359
    How close are the fork caps? It's gotta be minimal.

  6. #6
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25
    Close enough to contact the LSL Superbike Low bars... I'm thinking that moving the forks down the triples 2-3mm will solve the problem. Right now I've got the forks positioned so that the 2nd ring on the fork is about 5-6mm above the triple tree hole.

  7. #7
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25
    Sliding the forks down in the triple tree clamps solved the clearance issue for the bars, but now I've got a new problem: the stock bars have a locating hole in them for the throttle switch assembly (which has a male nub that drops in there). My new LSL bars don't have any and frankly, not real sure whether I should be drilling into them?

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    4,359
    Drill them and be sure to chamfer the hole.

  9. #9
    Junior Member
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    25
    Thanks very much... I'll be taking my stock bar and LSL bar into work tomorrow and will have a competent machinist match the hole locations for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •