Page 13 of 13 FirstFirst ... 3111213
Results 121 to 123 of 123

Thread: XB12 SS Lightning both lights on - HID redux

  1. #121
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by midway View Post
    MOSTLY that people STOP telling me I had a headlight out.
    ^^^^ this ^^^^

  2. #122
    Senior Member
    Join Date
    Mar 2015
    Location
    California
    Posts
    418
    Quote Originally Posted by lunaticfringe View Post
    you want to immediately stop doing that kenny. it's hell on the switch. follow jesse's posted vid or do the simple jumper wire trick that i always use.....light side of harness.....orange to yellow
    I remember someone discussed the wire swap mod... I think one of our electrician buddies on here talked about a possible issue with too much load on one wire. It was the reason why I went with this mod. This, and the ability to leave the headlights off while starting the bike to take it easy on my HID Ballasts.

  3. #123
    Junior Member
    Join Date
    Mar 2018
    Posts
    2
    ALTERNATE IDEA: I know it’s a little more complicated!

    I designed and installed a similar mod which adds a commonly-used trailer towing diode to safely merge the LO and the HI BEAM wires. It also keeps the Front Marker Lamp working normally when the ignition key is in PARK. The diode is rated at 6A and the combined current for both LO/HI lamps is 4.5A so there’s plenty of current margin.

    The diode can be purchased online or at any RV Trailer dealer.

    Blue Ox
    BX8864, 6 Amp Diode Single Pack, $15.50
    http://www.blueox.com/towing-accessories/bx8864/

    My schematic changes are shown in the picture.

    This mod is installed behind the windshield fairing.

    Using a Quick Splice T-Tap Connector (14-18AWG), splice onto the WHITE wire between the 39B Connector and the 38B Connector. Using a short piece of 14-18AWG wire, connect a Quick Splice Female Connector terminal on each end. Push one female terminal on the T-Tap Connector and push the other female terminal onto the Blue Ox diode male terminal (pick one of the blue ox male terminals on the end where there are 2).

    Cut YELLOW wire between the 24A Connector the 38B Connector. Install a Quick Splice Female Connector terminal (14-18AWG) on each end of the cut yellow wire. Push the female terminal which is connected to the 24A Connector onto the other unused Blue Ox male terminal on the end where there are 2. Push the remain terminal which is connected to the 38B Connector onto the Blue Ox male terminal on the end where there is only 1.

    It's a pretty easy mod but proceed at your own risk - anytime you modify a bike there's always a chance of messing up.

    IMG_1017.jpg



Page 13 of 13 FirstFirst ... 3111213

Similar Threads

  1. Kanata Thumper - redux
    By slabber in forum Buell Blast
    Replies: 7
    Last Post: 03-15-2012, 06:58 PM
  2. HD lights for Lightning
    By Doc Schlitzer in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 15
    Last Post: 11-01-2011, 08:27 PM
  3. New HID lights on 2006 xb12
    By Jabaniz in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 0
    Last Post: 04-07-2010, 11:43 PM
  4. 2004 XB12 s Head Lights
    By capscrew in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 2
    Last Post: 01-27-2009, 07:34 PM
  5. lightning fairing, Aprilia tuono mrriors, angel eye fog lights
    By xtremelow in forum Buell Parts for Sale
    Replies: 15
    Last Post: 10-31-2008, 03:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •