Activity Stream

I've tried this and that as suggested, and it still rides a bit off. Even got a new swing arm brace. It rides ok, so maybe I'll just leave it that...

I changed the transmission oil, and it seems to be ok now.

I would check the harness where it goes to the front of the bike. Also make sure you connected the ground and it is actually connected to a point...

Well, I did. I could find nothing that may have caused the issue. All of it worked at first and then all the sudden stopped. I’m wondering if it’s...

Weather here was good. Rolling Thunder was a good time as usual. Thank you veterans.

no....not the 2/3 bearing style.

ohhhhhhh....so that explains the odd looking bracket towards the front. i'll ditch that post cody.

I don't think that is a gutted stock exhaust, it looks like a drummer or Dean Adams, I forget which one has the two exhaust bodies ? But you...

That looks exactly like what is on the bike. Thanks! In the last picture I posted, you can see the end of the cable for the stock exhaust valve. ...

i saw that thx

You can probably “X” out the “compensator” as your bike doesn’t have one. Unless you swapped in a motor from a Dyna or something. If your...

Hate to disagree with ya john, but that looks like a d&d pipe to me. And they instruct you to use the one supplied clamp they send with the muffler

John, Do you have any more ?

That is a good deal for a real nice looking bike ! P.S. there is a guy looking for an xb9 one post below yours.

Come on Wally pics or it didn't happen ! Glad you kept it up. P.S. weather sucks here today, I wish I could be wrong as much as the weather...

Cheers, Cooter, I got a near new unit off ebay at a good price so my old one is just a play around unit. Keen to get more experience with the...

Apparently I have exhaust on the bike too... Guess going back to stock is going to be a bit harder than anticipated.

sold to shaughn

I’ve ran several pairs of Dunlop Q3’s. While they don’t last super long (5k usually), they have an unbelievable amount of grip once warmed up. Work...

Something you changed/touched in the head lamp area. Start there.

I bought the bike Sep of 2016. It was already modified when I bought it...

That is exactly what I was looking to do. Go back to as stock as possible and then work from there.

Thanks! Great links that should help a bunch. I didn't suspect the ECM as being the issue. I was mainly wondering if there were any known...

Umm, Cooter, you missed the last line.

I would download and save its program first. Then throw it away and buy a new one:...

PM-ing ya...