PDA

View Full Version : blinkers / turn signals not working



rickwisor
10-30-2007, 08:32 PM
I recently bought my son a 2002 Buell Blast. It had been laid down and one of the turn signals was broke off. I bought 4 replacement turn signals because a couple of others were all scratched up. As we installed them one at a time we would check after each one to make sure they worked. One by one they worked just great. After finishing my started the motorcycle to put it back in the garage and after starting it, the blinkers no longer worked. I checked the fuses under the seat and they all look good. I replaced the flasher and that didn't help either. My question is this - is there another fuse or fuses or something else I can check to get the blinkers to work. The blinker lights don't even light up - they do nothing. The headlight, taillight and brake lights all work fine. Any help would be greatly appreciated. Rick

BuellPartsGuy
10-31-2007, 12:03 AM
Check the switch. Could have popped that. Seen a few in the shop do that. Make sure all your grounds are good too.