Has any one put a power comander on a buell ulysses

[ches]

im having truble keeping my bike running smooth i take it to harley and they keep ajusting it on a cumputer but in a cuple of days it runs hot and jurky is the a power comander that works on my bike

[Warlock]

NO power commander for the newer buells to my knowledge. EcmSpy is your best bet

[firebolt020283]

If they do make one don't waist your money. As warlock said use ecmspy it will do so much more than a power commander, and the best thing about it is it is free (except the cable which is about $40-50)

[kbwood1008]

The EcmSpy web page says that the softwear is no longer available. The links to get the cable are also now bad. What gives?

[GSXdoubleR88ciNINJA]

Power Commander modulates your ECM data. But your stock ECM is fully programmable and has way more depth. You have and 2007 or earlier? ECM spy

[dallasb]

ECMspy here (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/ECM-Spy-Download)

[Stevenc150]

The links to get the cable are also now bad.Get one from Xoptiinside.com or Ebay.

[ches]

i got one from moto madness[up]

[buellyssesxt]

If your bike is 08 or later try this: turn on the ignition, make sure the kill switch is on, then, open the throttle fully hold for one second and shut it. Do this 3 times. On the later bikes this re-sets the tps.
Also try fitting the breather mod as this does effect the running of the bike.

[Alfatango1]

I once ran across a simple fuel controller made in Germany or England but can't remember the name or site. It allowed you to lean or rich the mixture without programing the ecm I think. Anyone know what product it was?