View Full Version : Has any one put a power comander on a buell ulysses

04-17-2010, 12:09 AM
im having truble keeping my bike running smooth i take it to harley and they keep ajusting it on a cumputer but in a cuple of days it runs hot and jurky is the a power comander that works on my bike

04-17-2010, 12:17 AM
NO power commander for the newer buells to my knowledge. EcmSpy is your best bet

04-17-2010, 01:33 AM
If they do make one don't waist your money. As warlock said use ecmspy it will do so much more than a power commander, and the best thing about it is it is free (except the cable which is about $40-50)

04-28-2010, 05:01 AM
The EcmSpy web page says that the softwear is no longer available. The links to get the cable are also now bad. What gives?

04-28-2010, 05:15 AM
Power Commander modulates your ECM data. But your stock ECM is fully programmable and has way more depth. You have and 2007 or earlier? ECM spy

04-28-2010, 11:40 AM
ECMspy here (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/ECM-Spy-Download)

04-28-2010, 04:42 PM
The links to get the cable are also now bad.Get one from Xoptiinside.com or Ebay.

05-15-2010, 02:24 AM
i got one from moto madness[up]

05-18-2010, 03:03 PM
If your bike is 08 or later try this: turn on the ignition, make sure the kill switch is on, then, open the throttle fully hold for one second and shut it. Do this 3 times. On the later bikes this re-sets the tps.
Also try fitting the breather mod as this does effect the running of the bike.

05-18-2010, 03:28 PM
I once ran across a simple fuel controller made in Germany or England but can't remember the name or site. It allowed you to lean or rich the mixture without programing the ecm I think. Anyone know what product it was?