PDA

View Full Version : Need some help from an 1125 (R or CR) owner



50dro
04-27-2010, 04:15 AM
Would one of you 1125 owners be so kind as to measure the bore and depth to the axle end around the rear axle on both sides as shown below? I've designed some axle sliders for my XB that I'm selling on here and would like for the design to accomodate the 1125's as well if possible.

http://z.about.com/d/motorcycles/1/0/B/6/-/-/1125RRtSwingarm_KW.jpg

Thank you in advance!!

GMan1125R
04-30-2010, 03:20 AM
If I remember tomorrow Ill bring some calipers from work. What measurements do you want, diameter depth, . . . ?

50dro
04-30-2010, 03:31 AM
I need the bore diameter and depth to the axle end around the rear axle on both sides. Basically, I need to know the max dimensions of a slider to fit in the recessed area of the swingarm (both sides). From what I have gathered, the XB's and the 1125's share the same axle so I won't need any axle dimensions.

Thanks for the help!

xtremelow
04-30-2010, 04:56 AM
PM, RT Performance he will measure it for you