HOW DO YOU DO A TPS RESET WITH THE ECMSPYCABLE??

[ches]

I JUST GOT AN ECMSPY CABLE AND IM JUST GETTING USED TO IT AND WANTED TO DO A TPS RESET I LET IT RUN FOR ABOUT 10 MIN @160 DEG. SET IT AT 1050 TO 1150 RPM IS THAT WHAT TPS RESET IS

[Alfatango1]

No you have to actually click the TPS reset button while connected and then set rpm. All you've done is set the rmp but not throttle positioning sensor. You have to back out the throttle screw until the tps % reads zero. Set TPS, then set screw to 4.6 degrees or 5.1%. Then set idle. Read the tuning guide in the help section first.