WTB 91310-04Y Saddlebags XBR

[Bossanova]

Actually, found a set of these but it is missing the bracket that mounts underneath the seat tray. Anyone got one FS?

[Bossanova]

Number 3 in the picture.
http://www.buellxb.com/buell_images/5956_20100522053147_L.jpg

[Bossanova]

ok, so how about someone that has this and can give me some measurements...

[guinnkyle]

Just use black zipties to secure it to your passenger pegs and your license plate bracket. I did that for my bags. You bought the lightning bags, I did the same thing. The zipties hold it really sturdy and they will be fine.

[xtremelow]

Hell couldnt you just fab a bracket up? Looks pretty straight forward as far as design[smirk]

[guinnkyle]

The XBR bags have slots for the mounting bracket to go into. The XBS bags just use a strap with velcro on it. They appear to be the same but once you see them both in person you'll see the difference. In the picture look at the area where the "B" is. The mounting bracket slides into that and holds the bags from moving around on the bottom side. If you actually have these bags that use this type of mounting bracket, you're probably going to have to fab one up like xtremelow said. It wouldn't be hard at all. I bought the Lightning ones and they work fine with using the zipties on the passenger peg heel guard and the license plate bracket. Good luck.

[Bossanova]

The ones I got are for the Bolt and yes I see the slot on the back where the bracket slides into them to keep them from flopping. Just thought I would try to find a bracket before I bend one up and make it, and possibly some measurements before I do that. Thanks for the ideas guys[up]