PDA

View Full Version : Jardine to Drummer



seanxb9sx
05-31-2010, 09:28 PM
I have an 06 sb9sx that has a jardine on it that is broken at a couple of the bracket mounting points. I think I have finally decided I want to get a drummer but I can't figure out how to mount the Drummer. The Jardine mounts differently in the rear and I don't have (and can't seem to find) the rear mounting clamp and spacer. Any input, help, or ideas. How is everyone else going from a Jardine to someother style?

SMDUB1
05-31-2010, 09:33 PM
ebay... cheap :D find stock parts. 3 clamps and spacer

seanxb9sx
05-31-2010, 09:35 PM
3 clamps?
1 front and 2 rear?

seanxb9sx
05-31-2010, 10:15 PM
I found a spacer from an 03 firebolt that I think will work. I am working on the clamps. Thnks for the help. Any other input i.e. tips, tricks would definitely be appreciated.

SMDUB1
05-31-2010, 10:23 PM
yes 2 rear 1 front.. then you should be good!Spacer has 2 bolts i think.. let me check

SMDUB1
05-31-2010, 10:25 PM
try buellsterparts.com too!

seanxb9sx
05-31-2010, 10:38 PM
Bought 2 clamps fromebay as well. It's all coming together.:D

seanxb9sx
05-31-2010, 10:41 PM
Do I need the front clamp with the Drummerss? It looks like it has a good mounting bracket. I can reuse the clamp that crimps it to the header can't I? It looks the same as the one on my Jardine.

SMDUB1
05-31-2010, 11:41 PM
Not sure about SS model mounting or what the jardine clamp consists of. I rock the special ops. It looks like stock clamps would work for the SS which would still mean you need front one.

SMDUB1
05-31-2010, 11:51 PM
after further review it seems the drummer SS has a custom front mount? Go here for mounting instructions for SS SS Installation K D Fab (http://kdfab.com/ssinstallation.htm)

seanxb9sx
06-01-2010, 02:15 PM
Excellent. Thnks for all the help. Think I have all the parts rounded up. Now I just need to save enough for the drummer.:D

SMDUB1
06-01-2010, 02:35 PM
Go get em! No problem buddy! Good luck[up]