PDA

View Full Version : Heres some photo's of my Baby as promised



xwiar
06-03-2010, 06:09 AM
http://www.buellxb.com/buell_images/6906_20100602225121_L.jpg

http://www.buellxb.com/buell_images/6906_20100602225404_L.jpg

http://www.buellxb.com/buell_images/6906_20100602225549_L.jpg

http://www.buellxb.com/buell_images/520_20100602231344_L.jpg

AV8guy
06-03-2010, 06:13 AM
Thats a damn nice looking bike. Next time, press enter between pics though ;)[up]

xtremelow
06-03-2010, 06:18 AM
Next time, press enter between pics though

Got it, also turned one of the pics[up]

What exhaust do you have or is that just some type of a truck exhaust tip?

xwiar
06-03-2010, 07:40 AM
The outer case was a brand new Class Tractor exhaust. it is fully baffeled and with No catalic converter in it, it is 105 decibels at 5000 rpm to meet New Zealands standards. The power delevery is much smoother with it and i will try and get it on to a dyno in the next couple of months. Thank you for the kind comments!

agfish18
06-03-2010, 02:22 PM
what kind of lights did you use for the inside of the pods, and how did you wire them? I have been wanting to do that for a while, but am not a wiring guru.

xwiar
06-03-2010, 07:39 PM
Put a simple light relay in so the low beam on the headlights can be turned off and on through a toggle switch. on the positive side of the relay wired the PURE WHITE 25cm L.E.D lightbars. ("That gives it the AUDI R8 look") Then again to the positive side of the relay wired in the PURE BLUE 25cm L.E.D LIGHTS. These can be bought through http://www.besthongkong.com/ they are very cheap so you can have alot of fun with them. Kindest Regards Xwiar

lambert64
07-14-2010, 08:17 PM
Where did you get the front turn signals?

turbosvt
07-25-2010, 02:50 PM
Nice looking bike!

RT Performance
07-25-2010, 07:55 PM
Nice job man.
To add to the LEDs when you pull the pod cover off there's a gap to slip the wires from inside the shroud I used the smd led strips from autozone.
http://www.buellxb.com/buell_images/3929_20100426121658_L.jpg
Should take a new pic I have added hid's and led markers since

sumguitardude
08-10-2010, 10:25 AM
Those lights in the radiator covers are sick!
I wanna put those in my bike.
how many lights did you put in each one to make it real bright?

agfish18
08-17-2010, 01:17 PM
do you have the lights wired directly to the battery? or how do you have yours setup? do you have a switch or are they just wired to come on when the bike is turned on?