PDA

View Full Version : Anyone interested in a XB9/12 Turbo Kit?



Glade21
06-14-2010, 05:30 PM
Hey guys, I just wanted to count the hands of anyone intersted in a turbo setup for their XB9/12 Buells. I have been racing and boosting cars for about 10 years now, and wanted to see what the market would be for something like this. It will be designed to work with the stock motor, but deffinatley upgradable for the guys with big bores, forged pistons, etc. The rough basis of the kit will be a new turbo, with optimal efficiency for the Buell, Stainless tubular manifold, stainless downpipe/exhaust, air/water or air/air intercooler, aluminum intercooler piping, larger injectors, oil fittings, and misc parts to be determined. It will be professional quality worthy of the Buell. About how much would you guys be willing to pay (be realistic here) so I know how to budget the system. Keep in mind this has the potential to double the power output of the motor. Below is my own race car to show the quality that will be put into it. Just wanted to see what you guys thought.

http://i286.photobucket.com/albums/ll112/streetassassin213/IMG_2367.jpg:)[up]

Banzai
06-14-2010, 05:36 PM
you might want to think about providing some ECU tuning as well.

Something GT15 size probably.

tricky part is getting the exhaust pipes the right length to time the pulses 180 degrees apart at the turbine inlet. otherwise you'll shock load the crap out of the hotside and the bearing life will be really really short.

Glade21
06-14-2010, 05:49 PM
Yeah I am going to have to look into an EMS for sure. A small compressor which flows about 15-20lb/min would be ideal. The manifold will deffinatley be equal length.

Warlock
06-14-2010, 07:05 PM
Interested depending on price

Glade21
06-14-2010, 07:20 PM
Yeah I will have to gather up pricing info this weekend to get a better idea, but I will try to keep it as affordable as possible.

tseldon
06-14-2010, 08:07 PM
i would also be interested as well price depending

uh2
06-14-2010, 10:16 PM
Same here....willing to spend, but need to know what the price range is.

xtremelow
06-14-2010, 10:43 PM
:D[up] boost, is next on my list and if I could just buy a bolt on setup I would be willing to spend the extra to save all the time.

Basically everything is price dependent

delta one
06-14-2010, 11:07 PM
I try not to think about it

mainly because I want it so bad.
if it was large enough gains for decent money I would do it.

big bore for instance is too much money for too little gain IMO

with a better price to HP ratio I too would be in

onelogue
06-14-2010, 11:49 PM
I am WRX guy so im all about Turbo's, you would have my interest.

delta one
06-15-2010, 12:19 AM
I am WRX guy so im all about Turbo's, you would have my interest.

uh oh

he has a protege this may start a war

AV8guy
06-15-2010, 01:12 AM
Im interested. I would want to see the reliability after a few months of use though. If it is a good set up and of high quality like you say it will be, I could see a couple grand maybe. I dont want to ride around on a grenade though.

Glade21
06-15-2010, 04:14 AM
Thanks for all the feedback guys. I think I will go through with it, so I will fab up a proto here in the future and I will update along the way.

dallasb
06-15-2010, 06:30 AM
Glade you also may want to get a hold of xopti. From my understanding there is still a block in the ecm that will work with a turbo setup.

konarider94
06-15-2010, 06:41 AM
im always interested in turbos but idk if id spend the money to buy one

uh2
06-15-2010, 09:24 AM
Newer ECM va older ECM may be an issue ??

Glade21
06-15-2010, 10:30 AM
About the ECU I think I came across something about what you were saying, and that would be awesome if the stock ecu would work, would deffinatley keep the cost down.

Jabaniz
06-15-2010, 12:30 PM
would a person also have to install low compression pistons or heads with a turbo?

bttrfngrz
06-15-2010, 12:49 PM
i'd be intersted depending on price.

Glade21
06-15-2010, 03:25 PM
The stock internals should be fine, just depends on how much power you want. Most engines can make %50 more whp on the stock internals safe with proper tuning.

lawdog
06-15-2010, 03:56 PM
Where do you plan on finding larger injectors? I know with my bolt on XB12R I am maxing out my injectors now at high rpm WOT. I have heard of switching to a V-Rod intake setup but I haven't found any higher flowing injectors for our XB's.

GatorBuell
06-15-2010, 04:40 PM
I've read that the injectors from a Cooper mini s will work, the ECM was originally designed to control boost and waist gate on the XB. The bike was originally designed to us a turbo from the factory. Buell had full emissions and durability completed until Harley killed it. At 9lbs of boost buell was getting around 135hp and the wheel.

Glade21
06-15-2010, 04:56 PM
Worse come to worse, some injector adapters would allow for more standard sizes to be retrofitted. From what it looks like the stock ecu will be able to run boost, and if it doesn't control timing a btm might work out alright for low boost on stock motors. Once I start peicing stuff together I will get he whole tuning situation knocked out.

anrkizm95
06-15-2010, 07:05 PM
i would be extremely interested if it was good quality bolt on kit.with injectors,fuel pump and tunning.electronicly controlled wastegate would be worth the extra money also.:)[up][up]

milehigh
06-15-2010, 07:38 PM
Look up ericz on buelletinboard.com he put a Garrett GT15 on his xb, and posted a fair amount of info.

Paniller
10-08-2010, 07:36 AM
I want one too, but funds are very limited. I'd prefer a very small turbo kit for very cheap over a big hp, expensive one.

BuellerPilot
10-08-2010, 08:00 AM
Cheap, reliable, high power.

Choose 2 and you WON'T get the 3rd.


~Mike.........

taylor
10-08-2010, 08:01 AM
any new info glade?

BeDaring08
11-24-2010, 12:50 PM
Any news?

badxb
11-24-2010, 02:39 PM
I was getting excited when i started reading this thread. Anyone heard from glade?

anrkizm95
11-24-2010, 03:59 PM
i dought anyone will make a complete kit.ive read several threads on several forums and nothing ever comes of it.

Glade21
11-24-2010, 05:41 PM
Sorry guy's I have been real busy getting my race car finnished up, but I am deffinatley going to be starting fabrication of the system one I pick up the turbo, took a pay cut at work and found out they are shutting the doors in january so funds are tight right now, but once I get some cash I will start it for sure.

stang65pony
11-24-2010, 05:54 PM
if you get a reliable set up at a decent price im sure cash flow for you would pick up for sure! lol

badxb
11-30-2010, 03:38 PM
bump

renobuell12s
01-30-2011, 01:56 PM
on youtube you can find a xb turbo assembled by showyo moto from quebec

http://www.youtube.com/watch?v=n5kdcMy--BQ

132 hp to the rear whell!!!!!

renobuell12s
01-30-2011, 02:16 PM
i find somes pictures when they work on it and inside it.
I try to translate with my **** off english:)

-change fuell pump( too small in stock)
-change oil pump( too small in stock=
-install a fuell regulator pressure
whith a little pressure in the turbo; 5.7 psi , we have nearly 150hp, good job [smirk]



http://img841.imageshack.us/img841/7219/020hw01.jpg

http://img200.imageshack.us/img200/9241/021pd81.jpg

http://img62.imageshack.us/img62/1274/019je11.jpg

http://img7.imageshack.us/img7/6013/023qn31.jpg

onelogue
01-30-2011, 02:20 PM
Thats fricken awesome! Are they selling it as a kit or anything? I would save up for something like this.

More info please.

renobuell12s
01-30-2011, 02:21 PM
a last for the road, like we say in france !!!!:)

http://img148.imageshack.us/img148/5892/037qs91.jpg

renobuell12s
01-30-2011, 02:33 PM
no selling, it was for a client.
the turbo kit come from france, a man name frank nourry who have a garage name; thorn bike.
he has work 2 bikes turbo only for race:
http://img585.imageshack.us/img585/7268/89974563091.jpg
http://img526.imageshack.us/img526/3193/89264516781.jpg
330 hp for this zx12r


http://img13.imageshack.us/img13/1434/94365783181.jpg
http://img8.imageshack.us/img8/3797/94827708711.jpg
240 hp for this 1000 gsxr

this bike was built for the "joe bar one" in france,
you can find more info by google

SMOAK
08-03-2014, 03:05 AM
Waking this old thread up..

Glade, anything ever come of this?!?!

djs2k2
08-04-2014, 12:31 PM
With 12000 views and 39 responses, you can let this one die and give up on it!

TPEHAK
10-02-2015, 04:09 AM
Any luck with the turbo kit?

djs2k2
10-02-2015, 05:24 PM
Wiel it went over a year without a reply, I'm going to go out on a limb and say in the nicest way, no!

dodge
01-24-2017, 02:04 AM
Any news?

dgreco49
01-31-2017, 06:05 AM
Ditto. I am interested in a small turbo as well. 06 XB12Ss