PDA

View Full Version : Update my 03 XB9R



texashick
02-03-2008, 10:30 PM
Ok I bought a 03 XB9R off of ebay for 3300.00. The person I bought it from has put a aftermarket exhaust, the race ecm, and a K&N air filter. My question is what else do I need to do to help this bike run better or even a little quicker? Some one said a sprocket and belt update and the oil pump gear..The seller told me he didnt know if that was done to it already. Is there a way to look to find out if it was done or not, or even if it needs it?

BuellPartsGuy
02-03-2008, 10:47 PM
Check the part number on the belt if there is one. other than that there really isnt a way to tell without pulling service history. As for the oil pump gear, considering the work involved in putting it in versus what you gain, I dont think its worth it, but thats me.

Airbox delete, oil catch can with breather re-route, cut white emissions wire.

All of these mods are explained on here at one point or another. Search for them and try them out.

texashick
02-03-2008, 11:00 PM
Thank you...All Knowing Buell Gods..lol, I appreciate the response

BuellPartsGuy
02-03-2008, 11:19 PM
I try....

Bill
02-04-2008, 02:28 AM
This is the first time I've heard of "cut white emissions wire." Is this something that is applicable to a '04 XB12R also? Thanks.

LeFox
02-04-2008, 10:05 AM
search and you will find...

just went to the search function (above 1st post, left side) and typed 'wire':
result page (http://www.buellxb.com/index.php?a=search&searchid=2140)

1st topic (http://www.buellxb.com/Buell-XB-Forum/Buell-Firebolt-XB12-XB9-2008-1125R/Buell-XB9-white-wire)