excessive oil blow off

[bigblue09]

my 2001 blast has the breather re route mod. its blowing off a good bit of oil. there is oil all over the top of the motor and on some of the fins. it looks like its blowing out of the rubber seal that sits in the top of the motor. is there anything i can do about this??

[dallasb]

replace the seal [confused]

[kalifornia]

kinked breather hose possibly

[bigblue09]

i put a hose clamp on it where it goes into the top of the motor and cleaned it all up. i will keep an eye on it and go from there.

[SMDUB1]

YOU PUT A CLAMP ON THE RE ROUTE??" No bueno..

[bigblue09]

why? it seemed pretty loose

[SMDUB1]

I misunderstood. I thought you clamped hose closed. You have a quick photo? You most likely would benefit from a new gasket. Cheap and easy.. But if it works it works! I may be way wrong though I have a 12r, just guessing.

[bigblue09]

i just put it all back together. if this doesnt work then i will be changing the gaskets. that was my other idea.

[ezblast]

Replace pcv valve and washer.
EZ