my m2 wont seat into gear

[jojobrown]

my 97 m2 wont seat into gear the other day i was riding it poped out of gear and wouldnt go back into gear just grinded ouch ! so i put a new clutch in and still nothin it shifts but wont fully seat in gear please help this is my only mode of transportation thanks

[ophawk]

Make sure that the clutch release ramp and assembly are adjusted.
After that then adjust the Cable for the proper release.

that will take care of most shifting issues unless the problem is in the tranny, which would need further description, to diagnose.

Hope that Helps,
Later
Dale

[jojobrown]

adjusted cluch in and out stiil just wont seat i can roll the bike back and forth with out it seating it just makes clicking sound like the gears are'nt fully syncing

[ophawk]

Jojo,
without actually seeing/hearing the issue I would have to say that possibly the shifter drum or forks have worn and not fully engaging the sliders onto the gears.

May need a rebuild, Easier on the tubers, but still a PITA without the correct tools.

later