PDA

View Full Version : Teather for the drag strip??



BPlass
07-20-2010, 10:11 AM
I was overlooking some rules and regs for my local drag strip (kinda having the urge to try some drag racing) and the only thing that I don't have to meet requirements is a killswitch teather. Anyone know what i can do about this?

thanks, Ben

Midnight82
07-20-2010, 10:46 AM
Here's what I found after a Google search:

Deadman's Switch (http://www.mpsracing.com/products/MPS/hc01.asp)

RT Performance
07-20-2010, 01:37 PM
I have herd of drilling the kill switch and putting a eye bolt in it then make a shock cord tether like a casino card cord ect

BPlass
07-20-2010, 07:09 PM
Thanks midnight and RT, i'll think about it.

black_xb12r
07-20-2010, 07:25 PM
most draps strips dont require them of you go to a street legal nite... but if your going to do bracket tacing then you will need one... i used to have to run them racing quads... there easy to install...

http://www.bikebandit.com/gunnar-kill-switch
that is the one i used to run on all my quads...

otherwise a buddy if mine always ran these and they seemd really good...
http://www.prodesignracing.com/atv_kill_switches.htm

good luck any questions let me know...

casey

snapper
09-13-2010, 09:40 AM
Both my local strips require kill switches. Legal helmut, above ankle boots, gloves, full leathers if over 120 mph, you prob wont need full leathers lol (I didnt)

ZPower
08-12-2012, 11:28 PM
otherwise a buddy if mine always ran these and they seemd really good...
http://www.prodesignracing.com/atv_kill_switc ...

That is the same one I use for my sand drag quad. Haven't had any problems with it, and it isn't so big and bulky as to detract from the aesthetics of the handlebars. Works like a charm too!