View Full Version : Teather for the drag strip??
BPlass
07-20-2010, 10:11 AM
I was overlooking some rules and regs for my local drag strip (kinda having the urge to try some drag racing) and the only thing that I don't have to meet requirements is a killswitch teather. Anyone know what i can do about this?
thanks, Ben
Midnight82
07-20-2010, 10:46 AM
Here's what I found after a Google search:
Deadman's Switch (http://www.mpsracing.com/products/MPS/hc01.asp)
RT Performance
07-20-2010, 01:37 PM
I have herd of drilling the kill switch and putting a eye bolt in it then make a shock cord tether like a casino card cord ect
BPlass
07-20-2010, 07:09 PM
Thanks midnight and RT, i'll think about it.
black_xb12r
07-20-2010, 07:25 PM
most draps strips dont require them of you go to a street legal nite... but if your going to do bracket tacing then you will need one... i used to have to run them racing quads... there easy to install...
http://www.bikebandit.com/gunnar-kill-switch
that is the one i used to run on all my quads...
otherwise a buddy if mine always ran these and they seemd really good...
http://www.prodesignracing.com/atv_kill_switches.htm
good luck any questions let me know...
casey
snapper
09-13-2010, 09:40 AM
Both my local strips require kill switches. Legal helmut, above ankle boots, gloves, full leathers if over 120 mph, you prob wont need full leathers lol (I didnt)
ZPower
08-12-2012, 11:28 PM
otherwise a buddy if mine always ran these and they seemd really good...
http://www.prodesignracing.com/atv_kill_switc ...
That is the same one I use for my sand drag quad. Haven't had any problems with it, and it isn't so big and bulky as to detract from the aesthetics of the handlebars. Works like a charm too!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.