PDA

View Full Version : D&D????



Shane
07-22-2010, 09:37 AM
i want one for my 2010 xb9sx! can i run it without a ecm alter or fuel map?

i just want to throw it on and go...

any help?

freak2180
07-22-2010, 10:18 AM
yes

Shane
07-22-2010, 11:43 AM
you suuuuuuure??? lol she's my baby and i dont want to mess her up.lol

Drkside79
07-22-2010, 11:54 AM
Shane go to American Sport bike they have a review. Yo most likely would be better off with a drummer. It follows the stock fuel curve pretty well. Not as loud though. I warn you the D7D is VERY loud and has gotten my friend pulled over.

ecan95242
07-22-2010, 01:04 PM
I have had a D&D on my 0812r for well over a year. I just put it on with no tuning and it ran fine. The throttle was a little sluggish but everything was fine once the rpms got to 3k. I have since had it dyno tuned and the throttle response is much better.
http://i139.photobucket.com/albums/q288/ecan95242/dyno0812r2.jpg

Jon0341
07-22-2010, 01:24 PM
Yes throw it on and go the new ecm have a learning function. You have to go for like 15 minutes above 3,000 RPM's for the ecm to learn. Fishgutz on this site had the open air conversion and a hawk performance exhaust on his 09 xb12; put it on the dyno and had a ideal f/a ratio. Just look up hawk performance exhaust to see for yourself.

redbolt04
07-22-2010, 02:41 PM
ive been running my 04 12r for 4,000 miles now all stock with only a D&D and have had no issues

Shane
07-23-2010, 08:39 AM
thanks guys...now where to get one new for cheap? lol

MAGIC
07-23-2010, 09:42 AM
This is where I got mine. The cheapest I could find. Unless you can get a used one.
Anyways the link (http://www.pipecity.com/Products/ProductDetails.cfm/Search/44311S/ProductID/30947)

Shane
07-25-2010, 11:17 AM
HELLSYEAH!!!! JUST ODERED THAT LOUD BASTARD! thx guys.