View Full Version : 1125r exhaust removal?
stuuk
08-02-2010, 03:55 AM
Hi Guys
I have a stealth slipon to fit to my 1125r.
How do I remove the oem can?
I cant seem to find all the mounting bolts
Thanks
Stu
Bossanova
08-02-2010, 06:12 AM
There are two bolts up by the oil cooler and I think there is at least one back under the shifter area. Save the hardware from the oil cooler - you might have to re-use it.
d_adams
08-02-2010, 08:29 AM
3 bolts up front for the oil cooler and bracket. 5mm and 6mm allen bolts. 13mm nut on the left bolt only, craftsman open end wrench will work fine. 2 more 6mm allen bolts at the rear, one is through the pulley. Loosen the clamps next. Also loosen the right foot peg bracket, 2 bolts. Exhaust should almost fall off the bike at that point.
Cronce1125R
08-21-2010, 10:00 AM
how many exhausts do you think you've taken off and put back on dean ;)
d_adams
08-21-2010, 02:06 PM
Entirely too freakin many.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.