PDA

View Full Version : Diy fender elminater?



buellet proof
08-25-2010, 11:51 AM
Does anyone have somthing on a DIY for a X1 ?

twobuells
08-25-2010, 06:58 PM
A company named Eurocomponets made one but many people just cut the sides and bottom off the stocker to make it look better. The trick is not to cut into the under seat storage area.

james2285
08-26-2010, 10:21 AM
Americansportbike.com has a carbon fiber one. kinda pricy but very cool.

buellet proof
08-26-2010, 06:45 PM
I cut my stock undertail but I would like it to look a little better. I have some diamond plate I am planning on trying, I just didn't know if someone had some info on cuts and things like that. Thanks

popeye13433
09-01-2010, 10:32 AM
i did my own on the 2000 x1 ill check to see if i have any pics it was a while ago.

popeye13433
09-01-2010, 10:37 AM
here is the best photo that i could find. i actually removed the storage compartment and all the other junk that was back there. I cut out a piece of aluminum to fit and riveted it to the tail section. you lose the lock and key for the seat but i just tucked it and never had anyone mess with anything

http://thumb2.webshots.net/t/16/16/2/41/55/250024155NwxKLy_th.jpg (http://good-times.webshots.com/photo/1250024155056625042NwxKLy)

buellet proof
09-01-2010, 12:38 PM
That looks good. I have an old diamand plate truck box that I might do that with. Thanks

pur pony
09-01-2010, 01:57 PM
here is steves X1 with a diamond plate undertail-

http://www.badweatherbikers.com/buell/messages/47623/589944.jpg

I have the Bankes Undertail

buellet proof
09-01-2010, 04:19 PM
That don't look that hard to do. it looks like a flat piece. Thanks for the pic.