PDA

View Full Version : plate reallocator



popeye13433
08-25-2010, 06:38 PM
OK im looking at the fender eliminator kit from EBR. im thinking something custom in addition to that for the plate to mount right below that kit flush to the "tunnel" for lack of a better term. anyone else have any other ideas or locations they think might look good for the location of the plate.

07Bolt
08-25-2010, 06:43 PM
$20 total; mounted thru the belt guard. cheap & ezy

http://www.buellxb.com/buell_images/4617_20090822193839_L.jpg

dave_xb12r
08-25-2010, 06:47 PM
Check out the Jardine plate mount.

Link (http://www.solomotoparts.com/product.php?productid=35294)

upthemaiden
08-25-2010, 06:56 PM
I usually stick with the random aluminum scraps I have hanging around the basement. Cut 2 strips, drill some holes and you're done.

09CRRED1
08-26-2010, 04:31 AM
i got the blinker and bracket eliminator and just took 2 screws and screwed it into the undertray its looks nice an clean this is pics of my bike

http://www.buellxb.com/Buell-XB-Forum/Buell-1125CR/Finaly-Pics