PDA

View Full Version : shock adjusting tools



jbean
09-28-2010, 11:11 AM
Where do I get tools to adjust the spring on my 01 Cyclone

03Firebolt9R
09-28-2010, 11:38 AM
Are you referring to a spanner wrench. You can probably find one if you googled it. But if you cant, a large pair of channel locks will also do the trick. I recommend using a rag too. Good luck.

Midnight82
09-28-2010, 02:49 PM
Cycle Gear sells them

RHard
10-27-2010, 01:39 PM
Does ASB still sell the wrench?

BuellerPilot
10-27-2010, 01:51 PM
If your just loosening it, a large flat tip covered in a rag works no problem. I just smacked it with my open hand striking the driver with my palm. Took only a few seconds and didn't leave a single mark on the prelaod adjuster at all. Now if you want to tighten it, that may require a heavier blow, like a mallet. Just be sure to wrap the end of the driver with a rag so if you miss or it bouces off your not scratching stuff up.

~Mike.....