PDA

View Full Version : chain conversion



xoptimizedrsx
02-13-2007, 08:16 AM
chain conversion. i need one bad. who has it affordable.and the adjustable tensioner. what are the good part numbers. i need to purchase and where do i get them. i dont want to push my bike any more that is old and belts are costing me too much. time for chain. american sportbike will not respond. plus i dont need 4 different rear sprockets. i have a 03 lightning xb9s help please my stock pullys are 30 and 72 i want to increase the ratio a little also. a 520 chain will do. or what ever parts i find avail and the proper offset. or spacers to align it all up.

xoptimizedrsx
02-15-2007, 11:37 PM
i have some of the 530 parts in and once it all on i'll post the total cost to do a 530 setup.

lucas70374
03-17-2007, 12:55 AM
Call Buell racing and get the XBRR swingarm.

BuellPartsGuy
03-17-2007, 04:25 AM
I can get them through Buell, as well as any other dealer linked to Buell. They might tell you they cant, but they are just to lazy to hunt the part numbers down. If you need part numbers, let me know, Ill shoot em to ya

lucas70374
03-18-2007, 01:02 AM
K0100.07AH Swingarm Kit

Comes with everything except 530 chain and sprockets

buelltool
09-08-2007, 01:34 AM
Why do you want to convert to a chain? I mean a chain is ok.....but why not switch your 03 belt to a new one. You can get the kits. Kinda pricey but a much cleaner final drive. But.....that's just my opinion.

Tork
09-08-2007, 03:37 PM
I just installed a 530 conversion kit from Saintly Cycles. It includes primary and rear sprockets, adjustable idler (choice of roller or sprocket idler wheel) and a decent Tsubaki O-ring 530 chain for $240. Direct bolt-on.

Contact:
Fritz Saintmire
saintlycycles@verizon.net
845-568-0701

shilohsk8
07-13-2008, 12:08 AM
Does Saintly cycles have a website? I can't seem to find one.

RHYNOXB9R
07-13-2008, 01:24 AM
Hey xoptimizedrsx,I read that your bike is old and the belts are getting costly, but is there any issue with the rpm's? I have a 2003 XB9R, and I spin 4000rpm at 80 mph,seem's kinda high to me.Is this something that you are experiencing?