PDA

View Full Version : Ignition?? problem



BuellRiderX
10-29-2010, 11:55 AM
Ok so last week I was driving home and decided to give it some welly ... went thru 3 gears flat out. pulling into the driveway, it just died. Tried starting it but it just ticked. Turned out to be a bad ground wire that ripped. Changed it, new battery, new plug .. now it turns over but doesn't start. The ignition module does blink when I crank it. But there is no spark from the plug

Gonna go disconnect the kickstand safety switch right now to see if that works

BuellRiderX
10-29-2010, 09:55 PM
Not the safety switch .. ordered an ignition module

If anyone knows of any other reason it won't start .. plz let me know .. thanx!

natez1
10-30-2010, 10:01 AM
from the service manual
fuel tank empty
fouled plugs
loose/ broken battery connections

sparkplug cables loose or shorting
loose connection at ecm coil battery
incorrect ignition timing
bank angle sensor tripped
clogged fuel filter
sticky valve
cam gear sheared
fuel pump inoperative
plugged injectors
fuse blown



my guess would be blown fuse or coil related

BuellRiderX
10-31-2010, 01:03 AM
All fuses and connections are good .. I know that for sure :D after tearing it apart

If it's not the ignition module, then I'm getting a new coil

If it's not that .. then I'll just do what I want to and get a bigger jap bike to make into a streetfighter. I just need an excuse to get a new bike haha