PDA

View Full Version : 2008 TPS zero



ulyscol
05-17-2008, 01:48 AM
Picked up an 08' service manual today and found that the TPS zero procedure is as follows.

a. Set the run/stop switch to run
b. turn on ignition
c. engine off, rotate the throttle closed to open and back 3 times holding the throttle grip against each stop for 1 full second.

Is this procedure different than the previous models? I see you guys all talking about Direct link and ECMspy to do this???

markwoodlief
05-17-2008, 01:52 AM
Yeah, the 08's are different, there is also a nifty little trick to unfouling your plugs on the 08's that would be sweet to have..

BuellPartsGuy
05-17-2008, 01:53 AM
'08's do not have the same service procedure when zeroing the TPS as the '07's do. The throttle bodies between the years are different.

ulyscol
05-17-2008, 01:59 AM
So that would explain why I can't seem to locate any kind of idle adjustment screw on my bike.