PDA

View Full Version : Touratech Footpegs



beatnick fly
03-04-2007, 06:44 PM
Recently changed the footpegs on my '06 Ulysses with Touratech's "long distance" footpegs. The originals are far too slippery when wet, and my foot was always slipping off them whenever I got up off the seat. In any event, the Touratech pegs are wider than the originals, (have teeth like regular dirt bike footpegs) so there's a lot less room between the shifter and the footpeg. Anybody out there with big feet like me (size 12), you'll not only have to raise the shift lever, but take the rubber off too for more clearance. Wrap the steel nub of the shifer with some duct tape if you don't want to scratch your Guccis'. Touratech makes an adjustable shift lever, but from the photo on there website, it doesn't look much shorter than the original, besides, duct tape's a lot cheaper. Hope this info helps.

llakeduude
04-23-2007, 09:08 AM
Thanks, Beatnick
I am going to order some tomorrow, they also show an adjustable/folding brake lever I am going to ask about. I am a size 12 so your info helps.