CoastieRider
06-28-2008, 12:30 AM
Step1: Remove plastic rh cover to access rear header.
http://www.buellxb.com/buell_images/1937_20080627171850_L.jpg
Step2: Measure header pipe with tape to determine how long you need your wrap. (refer to installation instructions)
http://www.buellxb.com/buell_images/1937_20080627171858_L.jpg
Step3:Wrap from the header down securing with metal tie wraps. (recommended to use 1" wide wrap so you can get better looking wraps)Then Prep for paint.
http://www.buellxb.com/buell_images/1937_20080627171907_L.jpg
Step4: After installed to your liking, paint with hitemp header paint, LET DRY!!!. then start your beast up and let her Burn.. She will..
http://www.buellxb.com/buell_images/1937_20080627171922_L.jpg
Step5: TaDaaa!!!! put your bike back together and your done..congratulations!! :)
http://www.buellxb.com/buell_images/1937_20080627171951_L.jpg
edit: clear picture layout
http://www.buellxb.com/buell_images/1937_20080627171850_L.jpg
Step2: Measure header pipe with tape to determine how long you need your wrap. (refer to installation instructions)
http://www.buellxb.com/buell_images/1937_20080627171858_L.jpg
Step3:Wrap from the header down securing with metal tie wraps. (recommended to use 1" wide wrap so you can get better looking wraps)Then Prep for paint.
http://www.buellxb.com/buell_images/1937_20080627171907_L.jpg
Step4: After installed to your liking, paint with hitemp header paint, LET DRY!!!. then start your beast up and let her Burn.. She will..
http://www.buellxb.com/buell_images/1937_20080627171922_L.jpg
Step5: TaDaaa!!!! put your bike back together and your done..congratulations!! :)
http://www.buellxb.com/buell_images/1937_20080627171951_L.jpg
edit: clear picture layout