Mike Van V
07-20-2011, 12:35 PM
For what it may be worth...
DO NOT use "Hot Cams" valve shims in the 1125 engines.
I started to, they are very rough ground. I though...lets see if they'll polish.
Well, they polished up just fine with 3000 grit sand paper (actually plastic backed).
What that says is.....they are WAY too soft.
Your money...your engine...I won't be using them.
Mike
DO NOT use "Hot Cams" valve shims in the 1125 engines.
I started to, they are very rough ground. I though...lets see if they'll polish.
Well, they polished up just fine with 3000 grit sand paper (actually plastic backed).
What that says is.....they are WAY too soft.
Your money...your engine...I won't be using them.
Mike