View Full Version : ASV C5 Levers?
xtreme
08-06-2011, 12:15 PM
Ok I got my ASV CD Levers and got a chance to put them on today. I had noticed in the past that my factory clutch lever seemed a bit loose, now that I have the ASV's installed it seems more so. It is within tolerance as per the manual at 1/8" from ferrell to actual lever. Just seem s a bit excessive. The lever does not go back to full out position with the 1/8" play. Anyone else see the same issue on theirs?
jakestolar
08-06-2011, 12:25 PM
you adjust the clutch according to the manual?
Kid1620
08-06-2011, 12:30 PM
I had the same problem with mine but I took them off because the brake lever would hit the gauge cluster at full lock and engage the brake.
jakestolar
08-06-2011, 12:40 PM
I took them off
I had the same problem. But just rotated the assy up a bit and now she clears just fine.
xtreme
08-06-2011, 12:46 PM
I am going to adjust it. But just kinda strange that the manual basically says it is within tolerance.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.