PDA

View Full Version : Headlight Wire Harness Part Number



Cocopelle
07-20-2008, 01:00 PM
What is the part number for the headlight wire harness?

http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/Headlight-Mod---Both-Lights-On-w-Hi-Beamnullhttp://i95.photobucket.com/albums/l144/speedkills66/buell/headlight%20mod/6.jpgHeadlight mod link (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/Headlight-Mod---Both-Lights-On-w-Hi-Beam)

Cocopelle
07-20-2008, 01:01 PM
This would be for an '03 Lightning XB9S

BuellPartsGuy
07-20-2008, 05:56 PM
Ill get the part number on Tuesday when I get back to work. Remind me....

Cocopelle
07-21-2008, 03:16 PM
I will try to remind you, pretty busy here myself so if I forget forgive me. I do appreciate the time you put in here BPG.

Cocopelle
07-23-2008, 04:31 AM
BPG any luck finding the part number for this?

BuellPartsGuy
07-23-2008, 09:27 AM
Thats part of the main harness...

mrdozer2you
07-23-2008, 12:17 PM
Did the headlight mod...works just fine but.....when I turn my bars to the right the light will cut off and on. I know something is loose, but what? Checked the wires they seem fine, so im wondering if maybe one of the pins is loose in the housing? Any suggestions or am I better off just rewiring it with a new harness?

Cocopelle
10-06-2008, 04:33 AM
I got the correct connector from the dealer. They didn't know the exact part number so I ended up with 4 different parts. Only cost $12 for all the parts. Cut the old connector out, popped the new one in with the wire change and it worked perfectly. I think it was also easier to do it this way then to mess with the original connector and pushing out the connector pins, IMO.