Marker light removal?

[ATFIII]

Hey gents,
I have been wanting to remove the outside (farthest out) lights from my 09 1125R and want to put in amber bulbs. Would anybody have the idea to the kind/number bulb that the marker lights are? Does anybody know how to remove them? I figure i can just pull them out, but i dont want to mess anything up. Thanks in advance for the help. Ride safe!

[ATFIII]

Found out that a little use of force gets them out, but know i cant get the bulbs apart. I just stuck them back in, because if i break anything then im going to get pissed. If anybody knows how to take the bulbs out of the sockets they are attached to, let me know!

[1125rguy]

If you're talking about the little bulbs on the outside on each side, mine just pulled right out with a little force.

[ATFIII]

I pulled them out of the fairing, but i cant get them to release from the sleeve they are in :/

[1125rguy]

Pull harder I guess hahaha, seriously though, mine just pull right out. I do have an 08 though so maybe they changed them.

[1125rguy]

Ok, update, pull off the rubber boot over the bulb first, and there might be a latch or you just have to twist the bulb to pull it out.

[ATFIII]

Alrighty il give that a shot! But hey, if i break a bulb all hells gunna break loose!

[anrkizm95]

got a pic

[ATFIII]

Woot! Finally got the lights out! I did a little research and found that the "position light" is a common "194" Bulb. So i switched out the white bulbs for amber bulbs i ran out and bought for about $10 and check out the difference! I love the way it looks now!

http://i675.photobucket.com/albums/vv119/_KS_Saleen/JackAmberLights011.jpg

http://i675.photobucket.com/albums/vv119/_KS_Saleen/JackAmberLights010.jpg

http://i675.photobucket.com/albums/vv119/_KS_Saleen/JackAmberLights007.jpg

http://i675.photobucket.com/albums/vv119/_KS_Saleen/JackAmberLights009.jpg

http://i675.photobucket.com/albums/vv119/_KS_Saleen/JackAmberLights008.jpg


They look like they came from the factory this way!

[ATFIII]

By the way, sorry for the huge pictures. I had to wipe my computer due to a virus, and all of my editing software was deleted :/

[anrkizm95]

with those bulbs the 2 most common ways are push in and turn to remove or they should just pull out.i dont have an 1125 just offering some ideas.

[ATFIII]

I just used a little force with needle nose pliars, and the lights came out. Peeled back the sleeve slowly, and removed the light. The i switched em out with amber and know they look great. They were white stock, now they are amber. Love them!