PDA

View Full Version : Selling the 1125, lots of go fast and look good stuff up for grabs.



nitto12ss
11-30-2011, 01:42 PM
So the 1125 is going bye bye to make way for a new track bike, so she is getting stripped down and put back to stockish prior to sale.

Prices are negotiable to a point and do not include shipping.

What I have

Polished Keda RT-2, has 800ish miles on it, no dents or major imperfections. Paid $728, would like to get $550.

EBR race ecm for Keda pipe, paid $264 would like $200.

Will pair the muffler and ECM for $700.

A set of painted while wheels, some minor marks from multiple mountings but over good condition. Will come mounted with a front rotor and the rear will need axle kit to run on a street bike (it has a EBR chain drive axle and sprocket mounted) I have a 1125R pulley for it I can include for an additional $50. Would like $300 for the set.

Black GPR damper for 1125R, would like $350

50-Dro axle sliders (polished) would like $50

LSL foot control levers, would like $120

ASV F3 standard length/black. This is being sold in conjunction with a Nissin radial master cylinder. The brake lever was ground down and repainted to allow the lever to clear the fairing at full lock. Would like $175.

X1 EBR rear wave rotor and X1 Braking rear wave rotor. Both are used and have some minor surface rust. Would like $60 each.

Buell Fairing kit, good condition with the only blemish being from when it touched down at the Bowl at Chuckwalla it on the verry bottom and I polished it out for the most part. Paid 400, would like 200.



http://i429.photobucket.com/albums/qq19/turf2/5f32047f.jpg?t=1322685142

http://i429.photobucket.com/albums/qq19/turf2/8865294b.jpg?t=1322685274

http://i429.photobucket.com/albums/qq19/turf2/566842a6.jpg?t=1322685409

http://i429.photobucket.com/albums/qq19/turf2/261aa03d.jpg?t=1322685506

http://i429.photobucket.com/albums/qq19/turf2/15e5df06.jpg?t=1322685595

http://i429.photobucket.com/albums/qq19/turf2/590ef456.jpg?t=1320784394



I'm sure I'm forgetting a few things, but for now thats what I got. Also my bike is at HD so if its not in the pictures on my lawn its still on the bike so I will not be able to ship it to you until I get the bike back from HD.

If you have questions call or text at 951 534 4847

Thanks for looking
Walter/Nitto12ss

onelogue
11-30-2011, 02:09 PM
PM sent for Braking rear rotor.

http://www.buellxb.com/buell_images/3100_20110427182707_L.jpg

dave_xb12r
11-30-2011, 02:13 PM
Oh I want those white wheels! But I need to wait until I get $ back on this calendar order before I spend more.

nitto12ss
11-30-2011, 02:15 PM
Dave, for you I can do lay away if you really want it.

nitto12ss
11-30-2011, 02:20 PM
Dont forget guys prices DO NOT include shipping.

Paypal is nittordsorange@yahoo.com, and when sending payment please send as gift so I dont get nailed with paypal fees.

nitto12ss
11-30-2011, 02:25 PM
^^^^^I bought the rims from a Badweber, was going to use them as a spare set, but now that the 1125 is going away I have no need for them.

nitto12ss
11-30-2011, 02:26 PM
Guys I'm going to the ups store in 30, so those who pay before will have there stuff shipped today.

nitto12ss
11-30-2011, 02:33 PM
so then the answer is yes?

The guy was in northern Cali, I dont know what thread your talking aboot, but it sounds probable.

Braking rotor sold

Bossanova
11-30-2011, 02:33 PM
edit- did you also buy his chain drive set up (Buellishness)?

GLWS

nitto12ss
11-30-2011, 02:34 PM
May have bought from him, not my listing. Sorry misread what you were asking.

nitto12ss
11-30-2011, 02:36 PM
Were you running a chain drive (or did you buy the wheels Buellishness had)?
GLWS

Bought from Buellishness

nitto12ss
11-30-2011, 02:40 PM
No the chain drive was sold to someone else, I jut bought the wheels. So in order to run it you will need to buy the appropriate axle kit. EBR has them for $80 i believe.

nitto12ss
11-30-2011, 02:42 PM
I can assure you I am far from shifty. ;)

nitto12ss
11-30-2011, 02:48 PM
I also have a GSD key less gas cap for sale. Raw silver, $100

http://i429.photobucket.com/albums/qq19/turf2/f6d1c45b.jpg?t=1307801597

http://i429.photobucket.com/albums/qq19/turf2/Sep-26-TrackXperienceLevel2and3BRI_2601.jpg

ArmyMP09
11-30-2011, 02:54 PM
PM Sent on wheels. [up]

nitto12ss
11-30-2011, 04:04 PM
Wheels sold pending payment [up][up]

At 1600 im off to ups, pay prior and it will go out today.

nitto12ss
11-30-2011, 06:29 PM
Wheels and both rotors sold, guys check your PM box, I sent you tracking info. [up]

nitto12ss
12-01-2011, 10:03 AM
I have had some inquiry on the faring and MC/levers so to clarify.

The faring overall is in great shape (800 miles on it) the only blemish it has is on the right side at the very bottom. The fairing touched down in a banked turn at the track and scrapped it a little, the mark itself is in a spear tip shape and is about 3'' long. I have since wet sanded and polished it out and it it is gone for the most part. Also due to its location it is not that noticeable anyway.

The circle shows where the damage is

http://i429.photobucket.com/albums/qq19/turf2/IMG_4484-1.jpg

The MC and levers are also in good condition. They actually only have one lap at the track on them. Most are concerned as to what part was ground and painted to allow clearance of the front fairing support. The lever itself was untouched, the piece that was ground is the bit that attaches the lever to the MC. The top was hitting the fairing support at full lock so it was dremeled down and repainted. This is a pic of my XB but the setup is the same. The circle shows what area was ground down.

http://i429.photobucket.com/albums/qq19/turf2/IMG_3171-1.jpg

As stated before, my bike is at HD being fixed under warranty. So if you purchase a part that is still attached to the bike shipment of that part is contingent on when I get the bike back from HD. If you have any questions dont hesitate to ask 951 534 4847.

nitto12ss
12-02-2011, 11:12 AM
Motivation for ya, Keda RT-2 at LVMS.I dont think the video does it justice though. It sounds much different in person.


yovtGH9yxhk

xtremelow
12-02-2011, 11:23 AM
Did I miss what you are replacing it with?

nitto12ss
12-02-2011, 11:36 AM
Need to sell this one first, but most likely a Jap 1K. I have gotten to the point on the 1125R where if I want to faster I will have to throw some serious coin into it. Jap bikes just make more sense for what I want to do, parts are cheaper, available, and to be completely honest they are just plane better at the track. I had a bunch of fun on the 1125, but I dont trust it anymore after the engine failure.

nitto12ss
12-05-2011, 03:16 PM
Muffler and ECM sold pending payment.

Bossanova
12-05-2011, 05:24 PM
You running a different throttle set up?

Phrass
12-05-2011, 08:11 PM
PM sent on fairings!

ATFIII
12-06-2011, 05:15 PM
PM sent about the fairings If the deal falls through.

nitto12ss
12-06-2011, 05:54 PM
You running a different throttle set up?

Boss, I have a quick turn throttle tube from a R6 installed. Its a $18 upgrade new, not worth my time to sell so its staying on the bike.

Pm's replied to on the fairings.

nitto12ss
12-06-2011, 08:10 PM
Fairing sold pending payment

ATF, it it falls through, your up next.

nitto12ss
12-09-2011, 05:00 PM
Pics of fairings and brake master/asv levers.

The bike is still at HD and filthy.

fairing

http://i429.photobucket.com/albums/qq19/turf2/585208c1.jpg?t=1323476670

http://i429.photobucket.com/albums/qq19/turf2/f26c21a1.jpg?t=1323476655

The fairing has been wet sanded down to 4000 grit at the damaged area. Its smooth, but for whatever reason it will not shine like the surrounding areas. Like I said though, its hardly noticeable when on the bike.

Master and levers


Clutch, untouched/modified.

http://i429.photobucket.com/albums/qq19/turf2/c51ceac5.jpg?t=1323476637

Master, painted black. Lever ground down to allow clearance of fairing stay.

http://i429.photobucket.com/albums/qq19/turf2/4edc0dd9.jpg?t=1323476605

http://i429.photobucket.com/albums/qq19/turf2/5c120d75.jpg?t=1323476619

nitto12ss
12-09-2011, 07:49 PM
Fairing and master/levers sold.

Pharmer
12-10-2011, 08:25 AM
Do you want to sell the airbox cover on that XB?

nitto12ss
12-10-2011, 11:24 AM
The xb is not for sale and never will be.

ArmyMP09
12-10-2011, 12:20 PM
The xb is not for sale and never will be.
Well Spoken[up]

Pharmer
12-10-2011, 08:34 PM
I hear ya. I've owned 5 bikes and the XB is hands-down my favorite. If you won't sell it to me, who did the airbox cover work for you? I like the look, and it is even the same color as mine.

nitto12ss
12-11-2011, 11:20 AM
I did it, If you peel the decal off it leaves a perfect residue outline. I used a dremel to cut the bulk, a razor to get the corners at a perfect 90 and finished off with a file. I coated the inner lip with duplicolor truck bed liner and affixed the wire mesh to the inside of the cover. Be patient and dont rush. It took me about 8 hours to do mine.

NOT FOR SALE

http://i429.photobucket.com/albums/qq19/turf2/IMG_3196.jpg

http://i429.photobucket.com/albums/qq19/turf2/IMG_4153.jpg?t=1318230780