DeanAdamsDesigns (Keda Design) Exhaust systems for sale

[d_adams]

A few of you have one of these, I guess a few more have heard or seen them either in person or videos. Yes, they're loud, but these are some of THE most powerful systems out there for 1125's. XB pipes are showing about a 10% gain just with stock fueling, so there's still room for improvement with them.

Everything is hand built to order with 304 stainless steel, so I typically run several weeks behind. Occasionally I'll stop the ordering process if I get too far behind.

I build for both 1125's and XB's. EBR has an ecm available for the RT-3 and they have the RT-4 in hand now. I will eventually send them both XB pipes when I have spares to send them.

I also modify the stock 1125 exhaust outlets to give a little more sound and re-direct the exhaust away from the wheel & swingarm. This one sounds pretty good without being obnoxiously loud.

Got questions, shoot me a pm or email me at dadams1969@gmail.com

www.deanadamsdesigns.com

http://www.buellxb.com/buell_images/6421_20111223010252_L.jpg

http://www.buellxb.com/buell_images/6421_20111223010053_L.jpg

http://www.buellxb.com/buell_images/6421_20111223010732_L.jpg

http://www.buellxb.com/buell_images/6421_20111223005813_L.jpg

http://www.buellxb.com/buell_images/6421_20111223005856_L.jpg

http://www.buellxb.com/Buells-for-Sale/Buell-Parts-for-Sale/Buell-Aftermarket-Parts/Chin-fairing-brackets

[turboraven]

Looks nice. How much for the XB slip on?

[oh9bolt]

Here you go! (http://www.keda-design.com/)

[d_adams]

There's 2 different ones pictured, which one do you like? Dual round shells or the single longer oval one?

I'll be giving one up later this year, either an 1125 RT-3 or a RT-XB-3 for an XB. It hasn't been officially announced yet I guess, but it will be one of the giveaways, May is when it happens.

[2004xb12s]

Thats real cool man. Love the XB-1 but dont have $630. Wish i did. [up] for some sick pipes

[zdawg123]

Put my Keda RT-2 on last week with the EBR ECM and love it! Sounds like no other bike out there. The rumble at idle reminds me of a helicopter at idle. Very smooth rumble and a great design that flows perfectly with these bikes!

I chose to paint my exhaust with a high heat primer and silver paint because I am going to wrap it in the next day or so.

Thanks Dean!
http://www.buellxb.com/buell_images/9407_20111215102326_L.jpg

[brightbuell]

That blue color is sick, I want it!!!! What is it called???

[zdawg123]

Thanks! I like it myself. Notice the vehicle sitting behind the bike? It's an 09 Toyota Tacoma that's speedway blue, the same exact color of my bike. Guess which vehicle I had painted to match the other!:p

[d_adams]

Day after Christmas sale, I'll cover shipping anywhere in the US. That applies to US military guys/gals as well if it's going to an APO address.

[d_adams]

This is the design that made 143 hp at EBR.

http://i643.photobucket.com/albums/uu151/dadams1969/flexiglass/IMAG0761.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/flexiglass/IMAG0759.jpg

[zdawg123]

I have an EBR ECM prgrammed for the Keda exhaust for sale. It's only a month or 2 old. Selling my bike with the stock parts and no longer need the ECM. I will sell it for $200 obo. Shoot me an offer!

[mnbuellrider]

Excited to get my Keda exhaust for my XB9. Dean is a very easy guy to work with. Just wish I didn't have to rebuild my motor too. At least when this is all done I will pretty much have a new bike. I will be posting pics when this is all done. Looking forward to not only having a new XB, but being able to put 15-20k on the bike this summer!!!!

[d_adams]

Talked to both shops that I go to that have dyno's and they are both broken at the moment. One is supposed to be getting a software upgrade and service reps to come in and fix it (Gateway) and the other has some parts due in next week (Surdyke) so no testing on the xb9 front yet. Maybe next weekend for the dyno if they get it fixed.

[c818919]

Still got that ecm?

[sak1782]

When I pick up my 1125CR this spring, I will get one of these for sure. Reminds me alot of the D&D on my XB.

[d_adams]

More progress on the XB pipe. Both dyno's are still down.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/IMAG0862.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/IMAG0861.jpg

[airbornebuell]

how much for the xb pipe?

[d_adams]

$600 + shipping and whatever extras you want. Dyno results were good, the one above matched the Buell factory race exhaust but still needs more fuel, so more power is there with tuning.

[d_adams]

No pics as of yet, but I just found a local powder/ceramic coater. I should be able to get different colors, but I know both satin and matte black are available. I need to take a pipe over to get a definite price, but I think it will be under $100 for anything I make.

I'll be updating my website to reflect this soon.

[MuSh]

So a black RT XB1 will be $600 plus $100 for black coating, $80 to support a chin spoiler, and ~$35 for shipping? Just over $800 out the door...I need to do more saving! [mad]

[d_adams]

Yeah, that about covers it.

I'll be getting one done in silver (I think) pretty soon since that's what Dave wanted on his. Might get the headers done, that's totally up to him.
With a little luck, I'll have the pipe done in a week or so. I have 3 others ahead of it, so I have a bit of work to do yet.

[MuSh]

So about how long to get a black rt xb1?

[d_adams]

Rough guess, 4+ weeks right now. I'm just guessing on the ceramic coat time, but it should only be a few days and the guy is local to me so I can drop off and pick up pretty quick.

[d_adams]

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-3/IMAG1022.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-3/IMAG1023.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-3/IMAG1024.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-3/IMAG1025.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-3/IMAG1026.jpg

[jasonxb9]

Damn!!!!!! I love your exhausts!!! I wish I had money.

[Crescent1101]

How much for the XB pipe?

[Lesley]

http://www.buellxb.com/buell_images/9095_20120414140030_L.jpg

[d_adams]

$600 plus whatever options you might want.

[mnbuellrider]

Money well spent IMO. If you do get the exhaust enjoy the looks you get. My personal favorite is when you start it up at a gas station. :D

[FIDOSOL]

I'm just going to sell a testicle and use the funds to buy this and every other mod for my motorcycle that I want.

[FlaXB9R]

I'm just going to sell a testicle and use the funds to buy this and every other mod for my motorcycle that I want.
/\ Damn they'll pay that much for a testicle . I already have 3 kids so where the hell do I sign up ?:D

[FIDOSOL]

Testicles are apparently very valuable. They only take one, and you are usually still able to reproduce afterwards.

[FlaXB9R]

Sorry to disappoint you Fidosol http://wiki.answers.com/Q/Can_you_sell_a_testicle You had my hopes up too .

Also sorry for the thread jack but hey BUMP

[FIDOSOL]

All you have to do is find someone with money that needs a testicle, they are more common than you would think. Aside from that, there is always your kidney.

[FlaXB9R]

Furthermore, there has never been a successful testicular transplant.

Kidney may bring some hope back though .:D

[d_adams]

Wow.

[anrkizm95]

nuts.

[FIDOSOL]

Check the bottom of the page, there is a link to the 'only' successful testicle transplant.

[d_adams]

You know you want one...

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1037.jpg

[netty2424]

D_Adams, just curious, why weld the entire system, but use rivets on the caps?

[d_adams]

It's repackable, same as the EBR full race system. Several others out there do the same.

[FIDOSOL]

Yes I want one, no I can't afford it. :p

[d_adams]

This one will cost you both, not just one.

[FIDOSOL]

Damn, not fair at all.

[xlr8n_xb]

Just ordered my RTXB-1!! Can't wait.[up]:D

[kbfnail]

I checked ebr and cant find a preprogrammed ecm for one of these. Doesnt show your exhaust listed. Dratz!

[d_adams]

Only for 1125's at this point. I'll send them a XB pipe when I get an extra one built.

[kbfnail]

yes let me know when cuz i deff want it lol

[d_adams]

This is for the active military guys/gals out there. Posted it on FB also. If you know of someone thinking about getting an exhaust that's current military, let them know about this.

Memorial day tomorrow, any service member that contacts me for an exhaust gets 10% off the price of any pipe I make. Extras aren't included such as polishing, coating or brackets for chin fairings. If you can't contact me by tomorrow night, don't sweat it, I'll honor it all week. Contact needs to be through your military email for the discount. If you can't get it done this week, just let me know, we'll work it out.

[WildmanXB12R]

Not trying to push it but why only active duty? What about us veterans? Got to ask...........Thanks for supporting our military.

[d_adams]

Not trying to push it but why only active duty? What about us veterans? Got to ask...........Thanks for supporting our military.

Never really thought about it, just figured I'd do a little extra for the guys that are currently deployed, maybe give them something to look forward to when they get home? I have one brother that's a Marine, not sure where he's at right now but he was over in Afganistan last year.

Sent you a pm also.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1101.jpg


http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1113.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1114.jpg

[d_adams]

Labor Day sale!


www.keda-design.com or http://www.deanadamsdesigns.com/ for anything I make, there's a discount available and it will be automatically applied through this weekend. All you gotta do is pick what you want, add it to the shopping cart and away you go.

Please keep in mind that I do NOT have anything in stock, it's ALL custom built to order, so there is a delay from when you order to when it ships out. I do have some material on hand and have enough to build a couple of systems, but that's all. There isn't much of a backlog at this time, so the wait won't be too bad unless I get a lot of orders from this. If you want a specific time frame, ask and I'll give my best estimate based on the current number of orders to be filled.

Please make sure to add any comments to your order, such as outlet type and angle, finish (polished or coated) or any extras that you may want.

[d_adams]

Bump for the weekend sale. :)

[d_adams]

Seems to be even more mellow sounding outdoors.

PCes2Zp_d1k?hd=1

[nikfleisch]

You make is so hard to resist even if I am a broke college student...:D

[d_adams]

Ooooooh HOT DAMN that was fun! Went ahead and got insurance, had it inspected, spent some quality time at the DMV as well. Anyway, got to get in a short bit of a ride and other than a slight hesitation at 2200-2500 rpm, it runs pretty good. Roll on's were pretty smooth, felt like it had plenty of power. I checked with xtremelow, it's still got a stock ecm/map, so there's power to be had in it. No dyno yet and I doubt I'll ever get a good baseline out of it since it's got 30k+ on the clock.

Guess the only major thing I'll have to get soon is a new battery, the trip meter and clock keep resetting back to 1:00 and 0 miles. Odometer is going up as it should, so that's a plus.

http://i643.photobucket.com/albums/uu151/dadams1969/xb9/IMAG1473.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/xb9/IMAG1472.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/xb9/IMAG1471.jpg

Son #1 is excited and looking forward to riding it, probably won't happen until next year though.

http://i643.photobucket.com/albums/uu151/dadams1969/xb9/IMAG1469.jpg

One of my favorite pics, a piece of unobtainium. Can't show the other side or I'd have to keel you all. :D

http://i643.photobucket.com/albums/uu151/dadams1969/xb9/IMAG1468.jpg

[Rhino1]

Dean, that is just one gorgeous looking system! Good job!! [up]

[MuSh]

Ordered! Can't wait to install an compare to my hawk muffler!

[GAXB9R]

No comparison... Jk, but seriously ive heard nothing but great things. I want one too.

[d_adams]

Another one just went out in time for the track on Friday.

htztVhnbx7Y

[d_adams]

Finally got a chance to rework the front header on my 1125.

JBlBbWUZrPk

Pics later, photobucket is slow again.

[d_adams]

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1496.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1497.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1498.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1499.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1500.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1501.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1503.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1502.jpg

[Loki]

get her dynod and tuned yet?

[Radiati0n]

Awesome...I will be purchasing an RT-XB1 in a couple months. How much does it normally cost for someone to tune your bike?

[d_adams]

No dyno with this setup yet.

I've always just sent stuff direct to EBR for tuning, it's close enough for me when I get it back. They do take a while to get them done though.

[d_adams]

WOW, what a RUSH!!! I forgot how quick this thing is since I've been riding the xb. Air/fuel looks to be damn close, both cylinders were at 12:1 during WOT. Got into the ”Go straight to jail” speed in the blink of an eye.

[d_adams]

Not quite as high as I'd hoped, but my 1125 did start out at 122 hp at the wheel.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMAG1516.jpg

139 hp, 89 ft/lbs of torque.

[Loki]

You lost power?

[d_adams]

No, mine started out lower. EBR's dyno bike started higher (129 maybe) and made 143 so it's a 12.5% gain on their dyno, or 14 hp.

Mine baselined at 122 or 123 hp. It's at just shy of 140 now, so figure it's at least a 14-15% gain with the headers on my bike specifically. It really depends on where it starts at and how much of an improvement you see. I'll take 18 hp for what I've put into it. It may not look as pretty as their system, but it's just as functional and a little less expensive to boot. I will modify it slightly on the next one to make it easier to line stuff up, but it works for now.

Mine hadn't matched EBR's numbers even with the ecm/pipe combo, it's always been lower by 6-7 hp at least. Might be the way it was broken in, who knows. Eventually I'll get the 1190 piston kit and see what it makes, the headers are good for it.

[Loki]

yeah thats a good gain either way. i just want to hit that 140hp to the ground mark and thats all i care about. I cant wait for them to release a kit, im surprised they havent yet and will be super pissed if they dont plan on it. I even want the throttle body they have so i can get quicker revs.

It almost seems stupid in my opinion for a company that is trying to make money to build more bikes to refuse to sell a kit that would sell out like crazy for people to upgrade their old 1125's

[d_adams]

Bump for a 5% discount on any system available, this includes the 1125 stock muffler mod. Send me a pm, let me know what you want and include "BUELLXB" in the message. I will send back an invoice. Make sure to include your email address. This will be available for several weeks, possibly longer.

[d_adams]

Christmas is coming, so in the interest of getting ahead of the curve on this, I'll be running an early sale.

Standard prices.

1125 slip-on's.

RT-3 $550 + shipping
RT-4 $900 + shipping

XB slip-on.

RT-XB-1 $600 + shipping
XB headers $475 shipped


I'll be doing 10% off, but when I hit 6+ weeks backlog again, ordering gets turned off. If that happens too quickly for everyone who wants one to get in, just send me a message to get put on the wait list. I am currently at about 2-3 weeks from an order to building it.

To get the discount, send your paypal address and what you want, I'll send back an invoice with the discounted price. Shipping in the US is $35, message me for quotes outside of the US, it varies by country.

1125 slip-on's.

RT-3 $550 + shipping ($495 + ship)
RT-4 $900 + shipping ($810 + ship)

XB slip-on.

RT-XB-1 $600 + shipping ($540 + ship)
XB headers $475 shipped ($425 shipped)

Polishing or coating won't be discounted since I don't normally do either in-house.

[stensg]

http://www.buellxb.com/buell_images/13688_20121212095506_L.jpg[up] came in the mail today:D looks great I can't wait for summer. Ecm on its way.

[stensg]

wow I had been hesitant to spent the money on this exhaust but now that I have it I'm not regretting it at all. Dean has a top notch exhaust here and the customer service is there to back it up. He even answered questions not having to do with the system. Great guy and Great product if you get some shirts and /or stickers mad up ever let me know ill defiantly rock them and support your work.[up] sound clip (http://www.youtube.com/watch?v=sbgstnPtjMQ)

[d_adams]

Ok, that was fun while it lasted. Sale is officially done, if you've already sent me an email/pm then it will be honored.


Military discount still ongoing.

[d_adams]

Somebody's gonna be happy next week out in CA.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1739.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1740.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1741.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1742.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/RT-4/IMAG1743.jpg

[Theycallmecrash]

Oh for me? :D jk sooooonnnn!!!

[d_adams]

This one's headed across the pond later this week.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/polished/IMG_20130206_172425_zpsb8ff7293.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/polished/IMG_20130206_172433_zps7edff8c8.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/polished/IMG_20130206_180033_zpsa1746e67.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/polished/IMG_20130206_180114_zpsea194c2f.jpg

Did I mention I like doing these still?


http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/xb/RT-XB1/polished/IMG_20130207_184233_zps37163f0b.jpg

[d_adams]

So, a few guys have tried ordering chin fairing brackets from Jardine after I gave up on getting them and passing them on. I've had several more ask why I quit offering them, it's because they were hard to get ahold of and the new company didn't seem to care about getting them out. Anyway, several more people asked why I didn't make them, now it's finally at the point where I figured I'd at least try to make a set. Obviously these are not finished yet, but progress has been made. I will try getting them bent the rest of the way today if I get time, but I need a chin fairing to test fit on to the bike with since I sold mine last year. Anybody in STL that wants to bring one out? Dave, I know you said you didn't mind, but I also realize it's a bit of a drive for you in this snow we just got.


Anyway, here's the uncoated version, still needs some bending done. If I get them bent today, I'll be going to the powdercoater to get a quote for them in black only.

http://i643.photobucket.com/albums/uu151/dadams1969/Random_bike_stuff/IMG_20130223_085715_zps7f746158.jpg

[Red93stang]

[up]

[d_adams]

http://i643.photobucket.com/albums/uu151/dadams1969/Random_bike_stuff/IMG_20130223_105134_zps8162652c.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/Random_bike_stuff/IMG_20130223_105121_zps7ecdc2f9.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/Random_bike_stuff/IMG_20130223_101657_zps7f205f58.jpg

http://i643.photobucket.com/albums/uu151/dadams1969/Random_bike_stuff/IMG_20130223_101643_zpse495fe6b.jpg

Guess I need a chin fairing to test on it now.

[motoqueiro]

My goddess do I love those rt-1, they look so damn nice, I would love to get one for my xb9 but, you know how it goes :(

[BimmerFREAK09]

Ugh!!! I can't wait for mine to come in!!! Then I gotta wait for the snow to melt lol
THANKS DEAN!!!! SO EXCITED!!!

[Dave A]

I'll call you tomorrow Dean. If it'll get my bracket done sooner and help someone else you can most certainly borrow my lower fairing chin thing as promised.

[d_adams]

Thanks Dave, I dropped the brackets off after I fitted them on mine so they can get the last measurement and put it into their drawing. After that it's just wait for the bending bid, I should be able to pick that set up next week sometime.

[d_adams]

Not a fan of videos on FB, but if you can get to it, it don't sound too bad.

https://www.facebook.com/photo.php?v=597644110263426&set=vb.100000535282496&type=3&theater

[greasyxb9s]

What ever happened to the brackets??? If you get them going and sell them I'd buy a set for sure.....

[d_adams]

Sent you a PM, but just so everyone else knows, they're in work. I missed a hole by about 1/8" so it's being re-done. I need to sort out the final prices and I'll probably do a run of 10 to get started. Pricing is to be determined yet, I'm hoping for under $85 a set.

[greasyxb9s]

OK thanks like a said put me on the list!

[d_adams]

Mmmmmm...


tJ4PhoDkZRo

[nemoxb]

I want to do something like that but I plan on using a trans air box and mounting them Inside where the exhaust servo should be.

[greasyxb9s]

Can you slow the reading down a bit seems to jumpy and all over the place...... be hard to read like that....

Can you give me a link where you got your setup like that I'm interested in buying them..... I'd like to mount mine in air box cover though

[d_adams]

http://thmotorsports.com/innovate_motorsports/innovate_gauges_mtx_series/3845/i-529996.aspx

You might find them cheaper if you hunt around, but the retail is $199 each.

[greasyxb9s]

It says $169 for it.... does it still have capabilities to hook rear o2 sensor to stock ecm through the controller?

[d_adams]

Yes, it has both narrow and wide band output.

[d_adams]

I've been working on this for a couple of days, it's a bit more complex than the first one I did. EBR's pipe is in metric, mine are standard instead since it's harder to find mandrel bent metric tubing over here. I think the ID measurement is within .025" or so of theirs.

https://lh3.googleusercontent.com/-EfOVn6MRmrM/UbkeFhPLOHI/AAAAAAAAAPo/il5MbTyuyZI/w861-h646-no/IMG_20130612_190304.jpg

https://lh6.googleusercontent.com/-gdnPjQwI5T0/Ubu6tgY8RFI/AAAAAAAAARY/ZTVLYGJFLdU/w861-h646-no/IMG_20130614_165920.jpg

https://lh4.googleusercontent.com/-lshhLzkQ06I/Ub-ZUr8qLuI/AAAAAAAAATs/HBYnZ5i8bAg/w861-h646-no/IMG_20130617_180227.jpg

[d_adams]

https://lh3.googleusercontent.com/-mLWjz02zU6Q/UcYcQvFSl7I/AAAAAAAAAV4/7k4c6BvRw8I/w861-h646-no/IMG_20130622_164039.jpg


That was interesting to build...

[stensg]

Will you be making a header setup to work with your rt3?

[d_adams]

It's designed that way, yes. I haven't sorted out pricing for it yet. Not sure how many of these I want to make.

[stensg]

O durr i had a dumb moment i see it now just remove the y pipe. Time for some sleep soon i guess lol been up for 38 hours so far.

[1badtitan90]

I'm sure many otherd have asked this but where does the name keda come from.. the exhausts are stamped dean Adams designs. But where is keda from..

[d_adams]

I had a machinist guy making parts for me, seemed like the thing to do at the time to include his initials as part of it. So, it was ke (ken edmunson) and da (dean adams) designs, thus, keda-designs. I guess it took maybe 5-6 months and he was done making the parts and didn't want to make any more. I had other ideas and the exhaust stuff just kinda took off, especially after the shootout in 2010. I could have subbed out the spools and tail tidy to another machine shop, but didn't really feel like persuing it. I've got my hands pretty full now as it is.

I had a bunch of tags made up back then, maybe 50 at a time. I don't remember when I switched it over to just my name, but it was within the last year I guess, so if it's got just my name on it, it's a newer or more recent pipe.

[1badtitan90]

Yea I think its like a 163 or 153.. the tip is a little different than the slash cut..

[d_adams]

So, like any other manufacturer, I'm always wondering "How long is this going to last?". So, I took mine apart again, 14 months after I'd repacked it and built my full system.

http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMG_20130630_081020.jpg


http://i643.photobucket.com/albums/uu151/dadams1969/exhaust%20stuff/Full%20system/IMG_20130630_081100.jpg


I'm happy to report that after 14-15k miles and who knows how many trips to redline I've made, along with several trips to the dyno that it's apparently still the same amount that I'd put in back in early May of 2012.

[Loki]

Nice!

My current dream, Dean headers and 1190 kit! Man that would be a beast!

[d_adams]

Last one I built, shipped it on Wednesday, made it to NY by Friday morning.

https://lh3.googleusercontent.com/-0yZShNgVp9o/Ue8MTBls7RI/AAAAAAAAAZY/lsTlZ9WP8_Q/w881-h661-no/IMG_20130723_180115.jpg

https://lh3.googleusercontent.com/-r2ORQmjmAS8/Ue8MFMKwSVI/AAAAAAAAAYw/Yx5WgNg9udU/w496-h661-no/IMG_20130723_175958.jpg

https://lh6.googleusercontent.com/-SF_bqC9_l9Q/Ue8MEjbJtsI/AAAAAAAAAYs/QBptX-9zVtU/w496-h661-no/IMG_20130723_180008.jpg

https://lh6.googleusercontent.com/-6LJxGvGA4iw/Ue8MFD6l0fI/AAAAAAAAAY0/HB3J4HkSlXY/w496-h661-no/IMG_20130723_180027.jpg

https://lh3.googleusercontent.com/-1LRqSHHOd30/Ue8MTOuwL_I/AAAAAAAAAZc/z6ya_6OsC2o/w881-h661-no/IMG_20130723_180126.jpg

https://lh6.googleusercontent.com/-NdQ3SZm572U/UfPm_c3kdiI/AAAAAAAAAbc/YXe_POR0sMQ/w640-h480-no/photo2.JPG

https://lh6.googleusercontent.com/-R5Nhc2PgSwE/UfPm_a5A1iI/AAAAAAAAAbQ/JoH8gMZTNvE/w640-h480-no/photo3.JPG

https://lh4.googleusercontent.com/-o97jh9JCRaw/UfPm_jEpCII/AAAAAAAAAbY/PtEQhgALV_s/w640-h480-no/photo4.JPG

https://lh5.googleusercontent.com/-8TV5vXikQjM/UfPmPAjGakI/AAAAAAAAAaw/_iDd9wsS4cQ/w640-h480-no/rt-4-KDunmire.JPG

[Macbuell]

Dang that would look nice coming out of my new belly pan... Might start putting more into the piggy-bank

[d_adams]

1st time in a year and a half that I've had _anything_ pre-built and ready to ship. RT-3 with a straight cut outlet, it's done and ready to go.

https://lh6.googleusercontent.com/-TVFV-tSO-40/Uh_dfLh3EqI/AAAAAAAAArs/rCjwksO6zH8/w551-h735-no/13+-+1

[dec03001]

If you look reaaaaaaaaly close on the bottom....

It has my name on it.

[d_adams]

#183. It's too late to polish this one, but it cooooould get a black ceramic coating thrown at it for a little more.

[d_adams]

Annnnnd it's gone.

[Goris]

I don't know who is getting it, but he is one lucky dude! Oh wait... :D

[Shawns]

null

Mine came with the bike. I am guessing #041 is the 41st made? RT3?

[Shawns]

WTF.... How do you get the pictures to show up?

[d_adams]

Shawns, yes, that's the serial number. I'm at 184 now, so it's about 3 years old. Anything earlier than yours puts it in early 2010, pre-exhaust shootout. The only thing I build that doesn't get serial numbers is headers, I haven't figured out a good spot to put a tag yet, so none of them have gotten it.

Posting pics can be done either by uploading them here to buellxb directly in your photos section or host them elsewhere (like google+) and then use the image tag like you tried to do.

[Shawns]

http://www.buellxb.com/buell_images/17116_20130831211123_L.jpg
http://www.buellxb.com/buell_images/17116_20130831211112_L.jpg

[Shawns]

Eureka!

[d_adams]

I know who that was built for, it was rode pretty hard and put up wet on just about every ride. Those are 1/8" rivets, if you want to change them out. That's the only one ever tagged like that, you have a New Jersey bike.

[Shawns]

Didn't meet the guy, was sold to a guy in PA, then to me. I know it was at least used for track days. Any other info you have on the bike would be great. I guess it a good thing I am going to do a valve check this winter. This is what the bike looked like ....
http://www.buellxb.com/buell_images/17116_20130901033121_L.jpg (when I got it)
http://www.buellxb.com/buell_images/17116_20130901033511_L.jpg (10 min after I got it home)
http://www.buellxb.com/buell_images/17116_20130901033242_L.jpg(now)
http://www.buellxb.com/buell_images/17116_20130901033148_L.jpg

Powder coated rear swing arm, brackets and wheels. Hero Blue edition plastics.

[d_adams]

Stator recall was done on it at least once or twice. I don't remember everything he said was done to it, definitely slid through the grass at NJMP a time or two. I sent stickers for it a couple of times I think.


I like the hero blue/white combo. If they'd have offered that color in 2008, that's what I'd probably have gotten.

[Shawns]

What exhaust is it? Is it the rt3?

[d_adams]

Yes, that would be an RT-3 on your bike.

[d_adams]

Almost ready, got something extra in mind for this one. Possible 140+ hp with an ecm, should be done by mid-week and ready to ship.

https://lh3.googleusercontent.com/-W5qaxhudetQ/Uj9U8MHELfI/AAAAAAAAA3s/SRQ04UhboLE/w551-h735-no/13+-+1

[Goris]

Diggin it!

[d_adams]

RT-4, 140+ hp available with tune/ecm. Black velvet ceramic coat, polished outlets. Ready to ship. $1035 shipped. There are no others like this one.

https://lh3.googleusercontent.com/-DBU4r1VXMP4/UkISsFEtCcI/AAAAAAAAA4o/tRMiMLvG9pM/w551-h735-no/13+-+3

[BuddhaBuell]

^^
that is '**** me gently with a chainsaw' sexy
hot damn!
[up]

[d_adams]

^ That was funny enough to make my wife laugh.

[djs2k2]

Is it just me or does that look like a pair of legs opening up? :D[up]

[Dave A]

IMO your best work yet[up]

[d_adams]

This one is now spoken for/gone.

Trying to catch up on orders again, but if you want one, don't hesitate to ask about them.

[d_adams]

https://lh5.googleusercontent.com/-pinTu2WbODg/UvAKKu8CIeI/AAAAAAAAB0k/HzfqHieCgv0/w925-h694-no/14+-+1

https://lh4.googleusercontent.com/-MV8qWt-YjaU/UvAKKuH1YuI/AAAAAAAAB0w/vZYmftANvfk/w521-h694-no/14+-+2

https://lh4.googleusercontent.com/-WuB8BxGHS5s/UvBWkghV45I/AAAAAAAAB1o/tKZasrRGsYM/w925-h694-no/14+-+4

https://lh4.googleusercontent.com/-pau7tsdAyJs/UvBWksDRRhI/AAAAAAAAB1g/PbY8PuYXuv0/w521-h694-no/14+-+3

https://lh3.googleusercontent.com/-8v7QaW5wKRA/UvBWkmAEjTI/AAAAAAAAB1U/eOdTlbtg9f8/w521-h694-no/14+-+2

https://lh6.googleusercontent.com/-GP-3Gt4f49g/UvBWkm9vKvI/AAAAAAAAB1M/w47EtV3T0-8/w925-h694-no/14+-+1

[BuddhaBuell]

^^
exhaust p0rn
:D

[d_adams]

Yeah, somebody's gonna like it when it gets there. Due for a potentially large snow storm here, so it may not go out until later in the week. All I have left to do on that one is the spring retention hooks and rivets for the end caps.

[Macbuell]

Killing me. I have been asking person after person on craigslist (across the US) if they would be willing to part out their KEDA and EBR ECM for the last 4 months. NOBODY WILL PART THEM OUT! I want your exhaust so bad for my 1125cr but when it comes down to $800 total for my bike (RT3+ECM), or $1300 Cat-Back for my car I unfortunately have to go with my car :( This makes me sad. Amazing work Dean

[John422]

Holy ****! (Sorry dean for thread jack) what cat back system did you get for what car for 1300 dollars. That's steep! I paid 525 for my magnaflow cat back on my truck and that's a dual exhaust.
Also. Just hold off on the ECM till later. 550 isn't asking much for what you get. I can't even look at my bike anymore with out smiling, now when I start it, my cheeks start hurting. It's just how these bikes should sound. Period.

[d_adams]

NOBODY WILL PART THEM OUT

There's a reason for that. Aside from the full system, it's just 2 words.




Unmatched

Power

[Macbuell]

I am trying to convince people on craigslist who are selling their 1125 to part out their exhaust and they wont do it...lazy jerks.

$1300 gets my G37 coupe an ARK exhaust

[d_adams]

It's pretty rare to see one of mine come up for sale, I kinda like it that way. Of the almost 200 I've built, I've probably only seen 8-10 get re-sold. That's not saying all the other original owners still have them, but that's all I've ever seen come up for a 2nd owner or for sale. I looked on CL here and only saw one 1125 that had an RT-3 on it.

[Shawns]

Not giving up mine!:D

[drebinpk]

has anyone had there xb12 with dean's headers and rt-xb1 exhaust installed im curious of the gains with this setup. currently have only sean a dyno of the headers by them self on a xb9 and rtxb1 by it self on a xb9 and 12 with apparently no tuning

[d_adams]

https://lh5.googleusercontent.com/-3riIOruHYyo/UqbIcRqu6UI/AAAAAAAAALQ/mUQSNyc2Q3M/w958-h639-no/IMGP8001.JPG

https://lh4.googleusercontent.com/-tvK_40SMchE/UxCk1JZ_MOI/AAAAAAAAB-4/75fOidFwNHE/w529-h740-no/Robbos+dyno+1.jpg

Original posts are here, I think you have to register to view pics there though. Bike only started with 77 hp, yes it's an xb12. Not sure why it's as low as it is, but managed to put out an 8% gain. The headers are stock size for a 12, so there's no real expectation of a performance gain with them.

http://www.buellersdownunder.com/showthread.php?t=11067

[d_adams]

Made some changes last week. Partially upgraded the front brake with a used ZTL2 caliper, need to swap out the line and possibly the master cylinder later. Changed to translucent orange plastics. Had to put a stock exhaust on it for now since I want to ride it and don't have time to build myself another one at the moment with all the orders. More later.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/10341634_815339828478446_5407764665646665702_n.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/10353118_815339808478448_4719693577022736265_n.jpg

[Xb12sLt]

Hey there Dean, I know for a fact that bikes get super jelly if one is being ridden and the other one is left all alone:(. I'm sure that yellow one doesn't get out much... Cause look at it just sitting there in the back of the picture. I'd be willing to take it out with you when you go on some rides though. I know it would take time out of my day but that's what buellers are for.......we like to help.[smirk]

[d_adams]

Actually, the yellow one has about 1100 more miles on it, the xb9 has made it all of 1 mile so far this year. I was riding my 1125 more than anything until I sold it last weekend. That will change soon enough, waiting on new brake lines for it that I ordered last night. Trying to teach my son about some maintenance things while he still listens to me, this is one of them.

[Xb12sLt]

I'm sure it gets ridden whenever you have the chance, your obviously a busy guy. I admire your exhaust work and taking the time to teach your son.

[d_adams]

Today's efforts thus far. # 218-221

https://scontent-b-ord.xx.fbcdn.net/hphotos-frc3/t1.0-9/1012574_828779970466536_4619600045627934849_n.jpg

[d_adams]

Active duty guys, shoot me a pm if you want an exhaust. Memorial Day weekend, 15% off, just shoot me a pm or email to sales@cbbdllc.us and I'll get a discount code for you.

Thank you for your service!

[Sirius815]

You rock man! [up]

[d_adams]

Nope, not me at all.

[zew2888]

Glad I ordered last weekend! Can't wait for that RT-4!

[TX_BUELL]

Likewise.........can't wait for my XB1 Exhaust. He did send a teaser pick although [up] and it's in progress..........YAHOO!

[zew2888]

Not yet, I believe he was on vacation last week. Everyone needs a break every once in a while right! I got some patience, he does great work and great work takes time ya know. Good for you for supporting Dean and buying his exhaust. His work is great

[Sirius815]

I talked to Dean earlier this week and he's about 3-4 weeks out on exhausts - not bad at all for a good quality product.

[zew2888]

Oh yea, definitely worth the wait!

[mrlogix]

I guess I'm a walking talking sales rep for Dean now. I bought his 1125R and it has one of his custom exhausts on it. Dean, This bike is simply bad ass. The sound is great, the power is fantastic. Put almost 400 miles on it today.
:):):)

[zew2888]

I saw that he was selling it. Lucky You!

[TX_BUELL]

Ad me to the list GENTS and Happy Father's Day to me. ..........my teaser pic from Dean..........it's almost done with a sweet # to boot.......TRIPLE DUECE.....XB1 Exhaust and MADE IN THE USA!!http://www.buellxb.com/buell_images/18624_20140607200402_L.jpg
http://www.buellxb.com/buell_images/18624_20140607200454_L.jpg

[d_adams]

Rivets will be installed tomorrow after it dries out a little more, then it will be on the way.

[zew2888]

Thats great man! I cant wait to see mine! What a Father's Day Present!

[Sirius815]

Any more teasers? :D

[d_adams]

https://lh6.googleusercontent.com/-8AK7vAW6swI/U5bjK_SjBfI/AAAAAAAACdo/n0UkvRQg_jE/w555-h740-no/14+-+1

[zew2888]

Dean...Its like artwork lol. That set up is great looking. Love the red rivets with the polished tips.

[TX_BUELL]

Yup......agreed.......and it's all mine :D

[Omiotek]

Dean do you back purge your welds...... Looks great

[d_adams]

^ Yes and thanks.

[Sirius815]

Can't wait to get mine :)

[zew2888]

Yea...me either! Lol :D

[Cosworth]

Placed my order for a rt-3 exhaust for my 1125 couldnt stand the quiet stocker anymore! :D

[Sirius815]

Get in line :D!!

[zew2888]

Haha yea, I definitely know the want for more noise! But the power is where its at with Deans exhaust. I ordered the RT4, already got the ECM, just patiently waiting!

[agfish18]

Ordered my Father's Day present today Dean...can't wait! My old can recently bit the dust (FMF Apex carbon) and I have been wanting the RT-3 for a while now... Figured now was a good time lol.

[Sirius815]

Hey Dean - curiosity just struck me - what's my exhaust number?

[d_adams]

No idea. Should be up over 225 though, I'll be working on that one next week. Took today off to spend time with the family some. Shipped these yesterday.

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10420276_845471572130709_7680124022121650815_n.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10380903_845631842114682_6197392818828570117_n.jpg

[d_adams]

Just looked, curiosity got me. 227 will be yours.

[Sirius815]

Thanks Dean! Happy Father's Day! Hope you had a good time with the fam.

[zew2888]

Maybe Ill be lucky enough to get 225!!!!!

[zew2888]

By the way, Happy Father's Day Dean!! And Everyone else out there with kiddos!

[DrogeN Omen]

any progress on a pipe for the 1190RX?

[d_adams]

EBR has it in hand, I delivered it a couple of weeks ago at Homecoming. Just waiting on them again.

[agfish18]

Dean, I know you typically run about 3 weeks between order and delivery. Are you still around that time frame, or are you uber swamped? I'm Just anxious to get back out and riding again and cant until I get a new exhaust lol.

[d_adams]

5+ weeks right now. Sorry, I wish I could build these faster, but it's just not happening. I did order a air over hydraulic pump for my tubing expander a week ago to see if that helps any for the 1125 stuff but it hasn't shown up yet. I had a somewhat irate mother call and ask why I hadn't delivered after 2 weeks. I had to disappoint her a little more and let her know that I wouldn't get started for at least another week and that I'd ship it as soon as I could. It was that or send her the money back. I assume her son (the one that wanted the pipe to begin with) told her to wait a little longer. I just shipped that one last Saturday. I think I have approximately 9 or 10 systems to build right now and I average 2 a week. I'm going as fast as I can without compromising quality.

[Matteson]

[up]If I call and complain can I get mine quicker? :D

[agfish18]

Hey man, no real rush... just getting antsy. Thanks for the hard work and I'll just wait to hear from you :)

[Omiotek]

Dean.....never compromise quality. I know you won't. I deal with this at work sometimes. It's not the quality that would be sacrificed just the finished look which I'm unwilling to let go.

Build as you can and keep your quality and your name will be forever good. I'd say I could help you out but I don't have jigs for your stuff and I'm no where near you to come to you and build stuff for you

[2004xb12s]

Quality over Quantity. People that order pipes from you want beautiful custom fabricated pieces. And they sure do get it!

[zew2888]

5 weeks is definitely worth the wait! A system like this inst one that can be built over night and isn't machine made. It's hand built and perfect. Can't wait for mine...but I know when I get it, it will be the best exhaust you can buy for the 1125r

[d_adams]

These are FAR from perfect, I'm getting old (borderline ancient to some) and shake some. I just do the best I can. I've said it before, there are guys (some I know personally) that can weld circles, squares, whatever around me. I go for solid. I may be a little heavy handed sometimes, but typically my stuff doesn't break. I've seen a few that were crashed (very hard) and the welds didn't break at all. Massive dents, flattened out pipes, but no breakage. There were a couple very early on that did from frequency vibrations, but there haven't been any that I'm aware of in the last 175 pipes or so.

[zew2888]

oh don't be modest...lol :D

[zew2888]

Can't wait for more teasers!

[TX_BUELL]

[up] Installed and impressive deep toned rumble.........the exact sound I was looking for!! Reminds me of the of Borla pipe I had on my S1WL. Definitely not a low keyed pipe and I completely OK with that :D http://www.buellxb.com/buell_images/18624_20140618152404_L.jpg
http://www.buellxb.com/buell_images/18624_20140618152445_L.jpg
http://www.buellxb.com/buell_images/18624_20140618152056_L.jpg

[d_adams]

Glacier black, #226

https://scontent-a-ord.xx.fbcdn.net/hphotos-xfa1/t1.0-9/10500493_849153588429174_4255740795241299597_n.jpg

[zew2888]

That is a fine looking pipe there Dean! Damn sexy!!!

[Sirius815]

[up]

[d_adams]

Yeah, but just wait until you hear it in person...

[zew2888]

Yea...I can't wait...

[zew2888]

This will be a good week! All ready for the new exhaust!

[Sirius815]

^^ Wait your turn!! :227 is mine! :D

[zew2888]

HaHa mine is 226. Thats my RT4!

[Sirius815]

[down] :D

[zew2888]

Lol...Hey good news is you get it soon also! Long wait but worth it. Im hoping to have it by Wednesday!

[d_adams]

Dropped off 2 this morning at FedEx. Should be mid-week for both I think. Yes, I'm working on 227 now, but I have misplaced some 2" tubing so that's enroute to me also.

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/p403x403/10441009_851412061536660_2990808623748653807_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10406705_851412048203328_5787817591187607736_n.jpg

[Sirius815]

:D [up]

[zew2888]

Your the man Dean!

[zew2888]

So, I got the exhaust today and Wow! That exhaust is like a gift from God for the 1125r. That exhaust plus the EBR ECM is way better than stock setup. Sound is just amazing. Thanks Dean! Couldn't ask for a better product than yours.

[Sirius815]

Hearing about yet another thoroughly satisfied customer definitely solidifies my choice in getting Dean's pipe for my 12R - soon..soon :)

[zew2888]

Oh yea...I will recommend Dean's exhaust to every bueller I meet. Its awesome!

[zew2888]

http://www.buellxb.com/buell_images/18599_20140626183929_L.jpg

[mrlogix]

good looking bike [up][up]

[zew2888]

Thanks!![up]

[zew2888]

Even better now with the RT4 and ECM.

[Sirius815]

G*dd*mn it Dean!












That is such a sexy sound! [up][up][up]

Way deeper than the Spec-ops I loved, deeper than the Jardine it replaced. All smiles here! :D

[d_adams]

So.












I guess this means you're happy?

[Sirius815]

[up]

[Cosworth]

I keep finding myself contantly visiting this thread and deans website. Cant wait for my exhaust!! :D[up]

[djs2k2]

^stalker ^

[Cosworth]

Exhaust stalker, 1125 is just too quiet!

[djs2k2]

[up]

[d_adams]

https://lh6.googleusercontent.com/-Z6MLpNzuJnk/U8L2oUy8OII/AAAAAAAACjE/zo2EqvdVhxE/w917-h688-no/14+-+1

[djs2k2]

Dean I love your exhaust even though I run a D&D and I believe you are bar none at the top of your game for making Buell pipes, but with that being said in my opinion which means jack $hit that looks like a smoke stack off a diesel. I promise I'm not hating, I click on your link every time I see it, and I'm always amazed!

[303xb]

Uhhhhh.

[Macbuell]

I would have to agree (although my opinion also means jack). I like your pipes because they are the best looking exhausts available for the 1125. For me and my bike, my preference goes:
1. Appearance
2. Sound
3. Performance

For that pipe to be worth it it had better have some HUGE performance gains :)

[d_adams]

The outlet isn't exactly what I wanted so I will possibly change it.

Seems to be working ok for these guys though.


https://scontent-b-ord.xx.fbcdn.net/hphotos-xap1/t1.0-9/10245378_10152561681944872_7039892739362474838_n.j pg

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10530753_10152559508669872_2805413153557269253_n.j pg

Sure looks like an 1190 RX to me, but I've been known to be wrong before. Yeah, the angles are a little different on mine than theirs are, but I'm trying to work within the confines of the stock bodywork, so it is what it is.


https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10430381_863036310374235_5227935510068090285_n.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10556367_863036323707567_2300199370742680173_n.jpg

[d_adams]

Also, this was more of a test pipe to see how it looks and what it sounds like. It may be the only one I ever make like this, I don't know yet.

[djs2k2]

[up]

[RossLH]

If it were up to me, I'd say ditch the secondary muffler entirely and just have a muffler in the underslung position.

[303xb]

If it were up to me, I'd say ditch the secondary muffler entirely and just have a muffler in the underslung position.

[up][up][up] i see the EBR comparison (cycleworld) against the Panigale and the Panigale has an underslung exhaust which Erik pioneered, while the 1190 has a monster, ugly-ass can hung off of it.

UNDERSLUNG.

[d_adams]

Did this already, EBR has it for tuning. I've been ready to build more for a couple of months now but was waiting for a tune before selling them.

https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/603669_800486406630455_3966721462622818605_n.jpg

[303xb]

i just went from 6 to midnight.

[Cosworth]

Just curious does the longer exhaust retain the stock underslung or are you deleting that and moving it further back with this setup? The can further back on the rx is a wave muffler to cut out on droning and supposedly helps top-end power.

[djs2k2]

The underslung is to die for[up]

[d_adams]

Just curious does the longer exhaust retain the stock underslung or are you deleting that and moving it further back with this setup? The can further back on the rx is a wave muffler to cut out on droning and supposedly helps top-end power.

The only thing left is the headers from the stock setup. Pretty sure the quarter wave section is for low and mid-range, not top end. It's also for noise control, the rx does it exceptionally well, I think they stated that it's quieter than any other out there for the displacement. It's also frickin HEAVY at 25.75 lbs. The long one I posted weighs 12.25 lbs, the shorty is 8.5 lbs.

The answers I got back from EBR (on the tuning front) is that the traction control system is difficult to program for. I'd rather just run without electronic aids myself, if I get a little wheel spin, so be it. Get me the software and ecm to do it, I'll run with it. I have access to a dyno and a track if I really need it, both are 40 minutes away from the house.

[Cosworth]

your right it helps midrange.
25.75lbs is insane no matter how low on the bike you carry it!

[RossLH]

Did this already, EBR has it for tuning. I've been ready to build more for a couple of months now but was waiting for a tune before selling them.

Ah, very nice. That looks pretty great.

[d_adams]

Btw, they've had that ceramic coated one since the EBR/Buell Homecoming event at the end of May this year. I hand delivered it.

[Matteson]

I swore the team for the ama super bike had underslung exhausts. Are those pictures of worlsuperbike?

[d_adams]

Pegram's bike is AMA superbike, May's is WSBK. The long pipe setup is a little quieter, but not by a lot. Some tracks won't allow the loud exhaust, some do, Assen was the first track they had to make the change and the WSBK bikes have just stayed with the long pipe setup. I don't know why Pegram had it on his this round, he'd been running the standard race kit prior to last weekend from what I'd seen.

[mrlogix]

Did this already, EBR has it for tuning. I've been ready to build more for a couple of months now but was waiting for a tune before selling them.

[up]


i just went from 6 to midnight. lmao


Get me the software and ecm to do it, I'll run with it. I have access to a dyno and a track if I really need it, both are 40 minutes away from the house.
that just means your first in line for it right? lol

[agfish18]

http://www.buellxb.com/buell_images/3262_20140717084157_L.jpg

MMMMM Prettyyyyyy..... Thanks Dean! I will get it installed either tomorrow or Saturday, depending on weather.

[Cosworth]

Absolutely awesome exhaust, none of the videos do it justice. Picked the exhaust up this afternoon polished it got it installed and proceeded to terrorize the neighborhood.

Dean thanks again well worth the wait. :D[up]

http://www.buellxb.com/buell_images/18151_20140717183618_L.jpg
http://www.buellxb.com/buell_images/18151_20140717185853_L.jpg

[agfish18]

Got my RT-3 installed and took it for a short ride yesterday... The sound is just a tad bit deeper than the FMF exhaust it had on it previously, but sounds much, much meaner. I haven't had much of a chance to really get on the throttle yet because my registration is lapsed, and I don't want to get pulled over, but so far, me likey! I am sure the neighbors love me now that I just sit out and listen to it idle in the driveway. I should get everything registered this next weekend and then I will take it out for a true test ride. Anyway, thanks a bunch Dean... you make an excellent pipe!

[djs2k2]

Envy :p

[Sirius815]

Hey Dean - just watched your video of the 1190 exhaust prototype. Is your camcorder being completely overloaded? Very burbly...if that's even a way to describe it.

[d_adams]

Yeah, phone didn't like it at all, it's a Nexus 5. It sounds pretty much like the 1125 systems I build, maybe just a hair louder on the short pipe, a tad quieter on the long one but it's not by much either way.

[nitto12ss]

Repeat customer! Easy to see why. [up] Made my sexy bike look even sexier.

http://i429.photobucket.com/albums/qq19/turf2/Mobile%20Uploads/6D2181F4-EAE9-4A4A-95DF-069322DB8A56_zpsufigxcnj.jpg

http://i429.photobucket.com/albums/qq19/turf2/Mobile%20Uploads/134642D8-ED90-43A7-AA86-18B2F20F3225_zps5zm1grzi.jpg

http://i429.photobucket.com/albums/qq19/turf2/Mobile%20Uploads/1EC71715-27A3-409F-AC49-E17668918E0A_zpscqzjv9yn.jpg

http://i429.photobucket.com/albums/qq19/turf2/Mobile%20Uploads/B448AC1F-E671-4A18-A1F6-5CA406923100_zpsvj4mjv1b.jpg

[Sirius815]

How's the reverso?

[djs2k2]

It is sexy

[nitto12ss]

How's the reverso?

I like it, but its not one of Dean's pipes. It's one of two or three Voodoo XXX front exit pipes made.

[d_adams]

Matteson, one of these is yours.

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/13619_881817075162825_3895750867842853468_n.jpg?oh =172a8ce3dc5d8d666b1f4c9ff73337c3&oe=5474DF3E&__gda__=1417331267_31de2d356b155b1bface9125900e8f0 9

This is the other one I was working on during the week.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10603661_881816931829506_5737781690021523890_n.jpg ?oh=c0b4daef8d0d7cd750db305819183cc0&oe=546D3700&__gda__=1415441372_20cc9ddea40132050342a7a73c6b797 0

[Matteson]

Can't wait any longer! But I have too. Thanks Dean. So glad we live in the same state. Shipping shouldn't take too long.

[DrogeN Omen]

when i buy this system for my XB i will need the invoice to read under $350 total cost and the pipes will need to look used old and weathered. otherwise I'll get stung with $380 tax...!

wish importing parts to NZ was easier.