PDA

View Full Version : Voltage regulator on '02 Buell Blast



samato
08-31-2008, 04:20 PM
I'm trying to find out where the voltage regulator is and how to test it. Obviously, I don't have a manual yet so if anyone can offer any advice or point me toward an online wiring diagram or something, I'd be greatful.

Thanks.

ezblast
08-31-2008, 05:04 PM
I did it by ruling out my stator - knowing the rest - meaning plug, wires, and coil are good, check the connection of the regulator to the stator for elecrical flow at those two pins on the regulator side - there should be zero on both - current should only come from the stator, not to it - other wise you have bleeding - thus the regulator is bad - under your body above the rear tire on the left side you'll see a metal waffled box with wires heading out of it - thats the regulator, see my group site files section for pictures.
EZ

samato
09-01-2008, 02:02 PM
Thanks for the info. It seems like I do have current to the stator, so I guess the regulator is bad. Not terrible news since it's only a $32 part.