View Full Version : ducati tail light fit blast?

03-25-2012, 09:40 AM
is it just me or does it seem like the ducati monster tail light will fit the buell blast? i was loooking at this http://www.ebay.com/itm/SMOKE-94-07-DUCATI-MONSTER-M400-M750-M900-M1000-S4r-LED-BRAKE-TAIL-LIGHT-SIGNAL-/120880304231?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item1c25071067 and im pretty sure it will work. has anyone tried or done this before? its about 50% cheaper than the ones i find that are said to be made for the blast and they look exactly the same lol

03-25-2012, 11:39 AM
Yes those Duc taillights are the same! I have one on my tail lol

11-03-2012, 08:00 AM
Very nice! Good to know.

04-20-2013, 06:36 AM
I just picked up that exact tail/signal light for my 01 blast. does anyone have the wiring configuration for the blast? I need to wire it in there.

05-12-2013, 06:30 PM
alright i put this tail light on my blast today and you get the hyper blink for the turn signals now so im pretty sure i need to use a resistor to stop it just wondering which resistors you guys used to solve the problem

05-12-2013, 06:43 PM
It's because it must be an led light. Go to autozone and get a led blinker relay.

05-13-2013, 12:55 PM
Yeah it is LED and I knew it was going to hyper blink when I put it on so there's a relay to fix it. I'll have to look into that

05-13-2013, 07:56 PM
alright i got the EP36 relay from NAPA and plugged it in and it didnt solve the problem. wouldnt all EP36 relays be the same as this one doesnt say LED's on it just OE replacement. i might try one from autozone or advanced to see

05-13-2013, 07:58 PM
Nope it has to say Led 3-6 lamps

05-13-2013, 08:56 PM
mine on the back says max 6 lamps

05-13-2013, 11:09 PM
The new ep36 doesn't work for it, they changed it. You need an electronic version that is specifically for LED.

DrogeN Omen
05-14-2013, 01:42 AM
i also believe these fit the Uly too.

Octopusenvy ordered one off Amazon so will see if it really does fit when it turns up but a guy on www.advrider.com fitted one and said it worked perfectly.

05-14-2013, 10:17 AM
ahh i see, that stinks i guess ill just return this one but i think im going to keep it blinking faster because i think its more of a attention grabber so its probably a good thing

DrogeN Omen
05-14-2013, 01:22 PM

all you need to do is get 2x Indicator Resistors of ebay for $12, thats what i did for my LED indicators front and rear and they blink normal speed now.


05-14-2013, 01:29 PM
For future reference because the op decided to bail on slowing the blinkers down, you only need a ep36 that specifically says LED!!! 3-6 lamps, you dont need any resistors or anything else and it is a cleaner install than a bunch of extra doohickeys


05-14-2013, 01:42 PM
The resistors tend to get kind of hot and don't seem to really last a long time... I JUST had a set go out on my 954, so now I don't have blinkers till I get another set... But unfortunately my 954 doesn't have a flasher.. I'm gonna have to wire in one... Consider yourselves lucky lol...

05-14-2013, 03:49 PM
if i happen to be around a advanced ill swing in and see if they have this relay in stock and try it just to see if it works but i think this ep36 will be the one thatll work for slowing the blinking rate down. i thought about going the resistor route when i first installed but its to much extra wiring for a motorcycle.


05-14-2013, 04:07 PM
That relay in your link is the one you want. [up]

05-15-2013, 10:08 AM
Has anyone confirmed that this light will fit a Ulysses?

02-27-2014, 08:16 PM
Since this is an older post the actual ebay link was sold out. However there seemed to be another with the exact same light. It says on the compatibility chart however, that it would not work with a blast.
Is this still the correct light?

http://www.ebay.com/itm/SMOKE-LED-TAIL-LIGHT-W-SIGNAL-FOR-94-07-DUCATI-MONSTER-M400-M750-M900-M1000-S4r/380750643956?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222008%26algo%3DSIC.MOTORS%26ao%3D 1%26asc%3D20140107083349%26meid%3D5139485533058479 617%26pid%3D100011%26prg%3D20140107083349%26rk%3D0 %26rkt%3D10%26sd%3D120880304231